Dots, Coins and Die-Cut Shapes

Adhesive Hook and Loop Dots, Carpet Markers

Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed
Production lead time	2-3 weeks after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width and colour set per order
Lot report with every carton
Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.02 – 0.35 / pcFOB Xiamen · varies with width and order quantity

Adhesive hook and loop dots in a stock colour at the standard diameters, die-cut from the same woven tape as the roll goods, which means the hook density and the peel per unit area match the strip product exactly. Standard diameters run from 10 mm to 50 mm, and anything outside that is a new die rather than a slitting instruction. Send the drawing and we quote the tooling and the part together, because the tooling is a one-off and the part is not.

Where it is used

Typical uses are removable mounting of small signage, cable pads on painted walls, and assembly jigs that need a consumable with a known peel. Thicker acrylic coatings are quoted for rough or textured surfaces.

Ordering

Width, colour and put-up are set per order, so a mixed carton is normal rather than an exception. Minimum order is 500 pcs stock colour / 3,000 pcs dyed, and the master roll exists after the first run, which means a repeat order on the same construction does not add lead time.

How to specify it

For a first order we normally send a cut sample at your width plus the lot report from the run it came from. That way the sample and the bulk goods are the same construction, which is not always true when a sample comes from a different mill.

Quality control

Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.

Packing and shipping

Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.

If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Order by the profile, not the diameter: a round coin suits a drilled or moulded seat, a square resists rotation better on a flat panel, and a custom die-cut shape is what you specify when the part has to be applied the same way every time without a jig. Tooling is a one-off and typically takes 7–10 working days.

Read next Specifying die-cut hook and loop parts

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Kiss-cut or loose parts?

Kiss-cut keeps the parts on a continuous liner for dispensers and pick-and-place heads. Through-cut gives loose parts in a bag, which is cheaper and fine for manual assembly. Tell us which line you are feeding and we will quote the matching format.

What tolerance can you hold?

±0.3 mm on the cut profile and ±0.5 mm on position within the web. Tighter than that is a conversation, not a catalogue item. Watch the adhesive bleed as well: a soft acrylic can creep 0.2 mm past the cut edge in warm storage.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Dots, Coins and Die-Cut Shapes

Dots, Coins and Die-Cut Shapes Elastic Adhesive Hook and Loop Dots, Nylon Elastic Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, sam... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Adhesive Hook and Loop Dots, Black Adhesive Hook and Loop Dots in Black. Woven hook and loop, samples in 7 days,... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Adhesive Hook and Loop Dots, Red Adhesive Hook and Loop Dots in Red. Woven hook and loop, samples in 7 days, MO... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Mounting Adhesive Hook and Loop Dots Mounting Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, sa... MOQ 500 pcs stock colour / 3,000 pcs dyed