Dots, Coins and Die-Cut Shapes

Adhesive Hook and Loop Dots, Industrial Quality

Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed
Production lead time	2-3 weeks after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width and colour set per order
Lot report with every carton
Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.02 – 0.35 / pcFOB Xiamen · varies with width and order quantity

Die-cut adhesive hook and loop dots on a release liner, the standard diameters across in a stock colour, kiss-cut so each part lifts off the liner without the web coming apart. Standard diameters run from 10 mm to 50 mm, and anything outside that is a new die rather than a slitting instruction. Send the drawing and we quote the tooling and the part together, because the tooling is a one-off and the part is not.

Where it is used

It is used where a strip would be cut by hand and the cut edge would be inconsistent. A die-cut dot gives every unit the same engaged area, which is what makes a peel specification enforceable at incoming inspection.

Ordering

We quote EXW, FOB and CIF on the same sheet so you can compare against your forwarder rather than against our freight. Payment is 30 percent deposit with the balance against a copy of the bill of lading.

How to specify it

If the width is still open, send the part, the drawing or a photograph with a ruler in it. Choosing between 20 mm and 25 mm on a photograph alone is guesswork, and the difference matters at the edge where the peel starts.

Quality control

Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.

Packing and shipping

Liner-backed goods are packed flat rather than on a core where the part is kiss-cut, because a tight wind puts a set into the liner and the parts lift at the edges on the applicator.

If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Order by the profile, not the diameter: a round coin suits a drilled or moulded seat, a square resists rotation better on a flat panel, and a custom die-cut shape is what you specify when the part has to be applied the same way every time without a jig. Tooling is a one-off and typically takes 7–10 working days.

Read next Specifying die-cut hook and loop parts

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Kiss-cut or loose parts?

Kiss-cut keeps the parts on a continuous liner for dispensers and pick-and-place heads. Through-cut gives loose parts in a bag, which is cheaper and fine for manual assembly. Tell us which line you are feeding and we will quote the matching format.

What tolerance can you hold?

±0.3 mm on the cut profile and ±0.5 mm on position within the web. Tighter than that is a conversation, not a catalogue item. Watch the adhesive bleed as well: a soft acrylic can creep 0.2 mm past the cut edge in warm storage.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Dots, Coins and Die-Cut Shapes

Dots, Coins and Die-Cut Shapes Double-Sided Mounting Adhesive Hook and Loop Dots Double-Sided Mounting Adhesive Hook and Loop Dots in stock colours. Woven hook... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Double-Sided Elastic Adhesive Hook and Loop Dots, 30 mm round Double-Sided Elastic Adhesive Hook and Loop Dots at 30 mm in stock colours. Wo... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Adhesive Hook and Loop Dots, Strong Adhesive Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Adhesive Hook and Loop Dots, Nylon, 3 m Adhesive Hook and Loop Dots (3 m) in stock colours. Woven hook and loop, sampl... MOQ 500 pcs stock colour / 3,000 pcs dyed