Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Material | Nylon |
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Material | Nylon |
|---|---|
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
This item is quoted individually — send the size you need.
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerThis is the mounting version of self-adhesive hook and loop tape — no stitching, no rivets, applied by hand or by a laminator. 10-150 mm, a stock colour, with a heavy-tack acrylic that grips porous and painted surfaces. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.
Typical work is fixing panels, signs, trim and access covers to metal, painted board, glass and most plastics. What decides success is the substrate, not the tape: powder coat and acrylic hold well, polypropylene and polyethylene have too little surface energy and will release under load.
Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.
The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.
Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.
Packing is poly bag plus carton as standard. For humid destinations we add a desiccant and a moisture-barrier bag, because a nylon roll that takes up water in transit will measure wide on arrival and settle back a week later.
Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Self-Adhesive Hook and Loop
10 mm Heavy-Duty Self-Adhesive Hook and Loop Tape, White
Heavy-Duty Self-Adhesive Hook and Loop Tape at 10 mm in White. Woven hook and...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape, 3 m
Self-Adhesive Hook and Loop Tape (3 m) in stock colours. Woven hook and loop,...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Nylon Heavy-Duty Self-Adhesive Hook and Loop Tape
Heavy-Duty Self-Adhesive Hook and Loop Tape (Nylon) in stock colours. Woven ho...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Double-Sided Heavy-Duty Self-Adhesive Hook and Loop Tape, Bulk Roll
Double-Sided Heavy-Duty Double-Sided Self-Adhesive Hook and Loop Tape in stock...
MOQ 500 m stock colour / 3,000 m dyed