Heavy-Duty Self-Adhesive Hook and Loop Tape — Nylon
Heavy-Duty Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Material | Nylon |
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
Specification
| Material | Nylon |
|---|---|
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
What makes it different
- Width and colour set per order
- Lot report with every carton
- Samples in 7 days
Other sizes in this construction
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| White | 500 m stock colour / 3,000 m dyed | |
| 500 m stock colour / 3,000 m dyed | ||
| 500 m stock colour / 3,000 m dyed | ||
| 10 mm | White | 500 m stock colour / 3,000 m dyed |
| 12 mm | White | 500 m stock colour / 3,000 m dyed |
| 16 mm | White | 500 m stock colour / 3,000 m dyed |
Need a custom width or die profile?
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerAbout this product
This is the mounting version of self-adhesive hook and loop tape — no stitching, no rivets, applied by hand or by a laminator. 10-150 mm, a stock colour, with a heavy-tack acrylic that grips porous and painted surfaces. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.
Where it is used
It is used for display mounting, exhibition graphics, cable management pads, and removable covers on machinery. Twenty-four hours at room temperature gives full strength; a pull test done twenty minutes after application reads 55 to 65 percent of final and is not a valid reject criterion.
Ordering
Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.
How to specify it
If the width is still open, send the part, the drawing or a photograph with a ruler in it. Choosing between 20 mm and 25 mm on a photograph alone is guesswork, and the difference matters at the edge where the peel starts.
Quality control
Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.
Packing and shipping
Liner-backed goods are packed flat rather than on a core where the part is kiss-cut, because a tight wind puts a set into the liner and the parts lift at the edges on the applicator.
If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.
Ordering and shipping
- Sold by the roll, carton or pallet — mixed widths allowed.
- EXW Xiamen, FOB or CIF to your port.
- T/T 30% deposit, balance against copy of B/L.
- Sample orders ship by courier in 7 days.
Choosing this construction
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
Common questions
What is 25 mm hook and loop used for?
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Will it stick to plastic crates or powder-coated metal?
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
How long before I can load it?
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
What is the minimum order and lead time?
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
More in Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – 110 mm
Self-Adhesive Hook and Loop Tape at 110 mm in stock colours. Woven hook and lo...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Reusable Self-Adhesive Hook and Loop Tape (Nylon)
Reusable Self-Adhesive Hook and Loop Tape (Nylon) in stock colours. Woven hook...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Double-Sided Elastic Self-Adhesive Hook and Loop Tape – 12 mm, Red
Double-Sided Elastic Self-Adhesive Hook and Loop Tape at 12 mm in Red. Woven h...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Heavy-Duty Self-Adhesive Hook and Loop Tape – 12 mm, White
Heavy-Duty Self-Adhesive Hook and Loop Tape at 12 mm in White. Woven hook and...
MOQ 500 m stock colour / 3,000 m dyed