Straps, Ties and Cinches

20 mm Hook and Loop Strap, Cut to Length

Hook and Loop Strap at 20 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Width20 mm
ConstructionHook and Loop Strap
MOQ500 pcs stock colour / 3,000 pcs dyed
Minimum order500 pcs stock colour / 3,000 pcs dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width20 mm
ConstructionHook and Loop Strap
MOQ500 pcs stock colour / 3,000 pcs dyed
Minimum order500 pcs stock colour / 3,000 pcs dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.10 – 1.20 / pcFOB Xiamen · varies with width and order quantity

This is a made-up hook and loop strap at 20 mm in a stock colour, with the closure running the full length so the working diameter is infinitely adjustable within the strap length. 20 mm is the commonest strap width: enough face to hold a coil of hose or a bundle of tube, and narrow enough to pass through a bracket or a D-ring without folding over on itself.

Where it is used

Common assemblies are roll and coil restraint, tent and tarpaulin tie-down, medical and physio cuffs, and ski and board straps. The working length is what you should quote, not the flat length — a strap has to pass through the hardware before it closes.

Ordering

Width, colour and put-up are set per order, so a mixed carton is normal rather than an exception. Minimum order is 500 pcs stock colour / 3,000 pcs dyed, and the master roll exists after the first run, which means a repeat order on the same construction does not add lead time.

How to specify it

To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.

Quality control

Each carton is labelled with the lot number, width, colour and quantity, and the lot report references the same number. That is what makes a claim traceable six months later instead of a conversation about photographs.

Packing and shipping

Packing is poly bag plus carton as standard. For humid destinations we add a desiccant and a moisture-barrier bag, because a nylon roll that takes up water in transit will measure wide on arrival and settle back a week later.

Send the width, the colour and the application and we will quote against a real construction rather than a catalogue range. If you are comparing two suppliers, send both quotes and we will tell you which line item is the one that will move.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.

Common questions

What is 20 mm hook and loop used for?

At 20 mm this construction is normally specified for general closures, bags, packaging, display mounting and low-load bundling. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Buckle or tie — which one?

A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.

Can the straps be printed with our logo?

Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Straps, Ties and Cinches

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP