Rolls and Back-to-Back

Nylon Back-to-Back Hook and Loop Strap

Back-to-Back Hook and Loop Strap (Nylon) in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.

MaterialNylon
ConstructionHook and Loop Strap
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

MaterialNylon
ConstructionHook and Loop Strap
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
500 pcs stock colour / 3,000 pcs dyed
500 pcs stock colour / 3,000 pcs dyed
10 mm Black 500 m stock colour / 3,000 m dyed
12 mm Black 500 m stock colour / 3,000 m dyed
16 mm Black 500 m stock colour / 3,000 m dyed
20 mm Black 500 pcs stock colour / 3,000 pcs dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.06 – 0.85 / mFOB Xiamen · varies with width and order quantity

Hook and loop strap in a stock colour at 10-150 mm, wound under controlled tension so the roll does not telescope when it is mounted on a slitter or a laminator. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.

Where it is used

It is used by bag and case makers, furniture producers, automotive tier suppliers and packaging converters. If you run a fixed guide, ask for the width measured at the core and at the outside of the roll on the lot report — that is where a slitting drift shows up first.

Ordering

Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.

How to specify it

To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.

Quality control

Peel is tested on the finished lot, not on a sample kept from the previous run. If your incoming inspection uses a different pull speed or a different dwell time, tell us and we will match it so the two numbers are comparable.

Packing and shipping

Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.

Send the annual volume with the first enquiry, even if it is a range. Volume changes the put-up, the slitting plan and sometimes the yarn, and the same construction quoted at 500 m and at 50,000 m is not the same job.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Rolls and Back-to-Back

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP