Self-Adhesive Hook and Loop

12 mm Heavy-Duty Self-Adhesive Hook and Loop Tape, White

Heavy-Duty Self-Adhesive Hook and Loop Tape at 12 mm in White. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width12 mm
ColourWhite
AdhesiveAcrylic
ConstructionSelf-Adhesive Hook and Loop Tape
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width12 mm
ColourWhite
AdhesiveAcrylic
ConstructionSelf-Adhesive Hook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width, colour and put-up set per order
  • Lot report issued against the production lot
  • Samples cut to width in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
White 500 m stock colour / 3,000 m dyed
500 m stock colour / 3,000 m dyed
500 m stock colour / 3,000 m dyed
500 m stock colour / 3,000 m dyed
10 mm White 500 m stock colour / 3,000 m dyed
16 mm White 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.08 – 1.20 / mFOB Xiamen · varies with width and order quantity

A liner-backed self-adhesive hook and loop tape at 12 mm in White, coated both sides where the application calls for it, and die-cuttable if the part is going into a repeat assembly rather than a one-off fix. At 12 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.

Where it is used

It goes onto aluminium frames, painted steel cabinets, glass partitions and laminated board. Clean the surface with isopropyl alcohol first; dust and mould release agents are the two most common reasons a bond fails in the first week.

Ordering

Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.

How to specify it

Colour is the one specification that is cheapest to settle early and most expensive to settle late. Send a physical swatch if the colour is critical; a hex value on a screen will match under one light and fail under another.

Quality control

Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.

Packing and shipping

Liner-backed goods are packed flat rather than on a core where the part is kiss-cut, because a tight wind puts a set into the liner and the parts lift at the edges on the applicator.

Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.

Common questions

What is 12 mm hook and loop used for?

At 12 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Will it stick to plastic crates or powder-coated metal?

Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.

How long before I can load it?

Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Self-Adhesive Hook and Loop

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP