Elastic Sew-On Hook and Loop Tape at 10 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 10 mm |
| Colour | Black |
| Material | Nylon |
| Adhesive | Acrylic |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 10 mm |
|---|---|
| Colour | Black |
| Material | Nylon |
| Adhesive | Acrylic |
| Construction | Sew-On Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 25 mm | 500 m stock colour / 3,000 m dyed | |
| 500 m stock colour / 3,000 m dyed | ||
| 12 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Black | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerSew-on construction for sew-on hook and loop tape: the tape is stitched through, which means the seam carries the load and the hooks only have to hold the closure closed. 10 mm wide in Black. At 10 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.
Typical work is apparel closures, adjustable cuffs and waistbands, bag flaps, and upholstery where a removable cover has to go back on the same way every time. The tape is stitched through its full width, so the stitch line sits inside the woven area rather than beside it.
Order quantity is quoted in metres or pieces depending on the construction, and we will convert between them if your system counts the other way. Mixed widths on one purchase order are handled as separate lines with a shared lead time.
The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.
Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.
Liner-backed goods are packed flat rather than on a core where the part is kiss-cut, because a tight wind puts a set into the liner and the parts lift at the edges on the applicator.
If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.
Width is set by the seam, not by the load: 16–20 mm for apparel and light closures, 25–38 mm for bags and upholstery, 50 mm and above where the joint has to stay flat under load. Stitch through the tape, not beside it — a seam that stops short of the edge lets the corner lift and start a peel.
At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Nylon tape survives repeated washing at 40 °C; colour fastness holds grade 4 after five washes on the dyed line. Dry cleaning solvents attack the hook monofilament over time, so specify polyester if the garment is dry-cleaned commercially. Stitch through the tape so the seam, not the adhesive, carries the load.
Yes. Every roll is supplied as a matched hook and loop pair unless you ask for single-sided hook or loop only, which we also supply for converters who already stock the other half.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Sew-On Hook and Loop Tape
Nylon Sew-On Hook and Loop Tape
Sew-On Hook and Loop Tape (Nylon) in stock colours. Woven hook and loop, sampl...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
Nylon Sew-On Hook and Loop Tape, Black
Sew-On Hook and Loop Tape in Black. Woven hook and loop, samples in 7 days, MO...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
16 mm Medical Sew-On Hook and Loop Tape, Black
Medical Sew-On Hook and Loop Tape at 16 mm in Black. Woven hook and loop, samp...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
Elastic Sew-On Hook and Loop Tape
Elastic Sew-On Hook and Loop Tape in stock colours. Woven hook and loop, sampl...
MOQ 500 m stock colour / 3,000 m dyed