Dots, Coins and Die-Cut Shapes

10 mm Adhesive Hook and Loop Dots, Black

Adhesive Hook and Loop Dots at 10 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Width	10 mm
Colour	Black
Material	Nylon
Construction	Adhesive Hook and Loop Dots
Minimum order	500 pcs stock colour / 3,000 pcs dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width	10 mm
Colour	Black
Material	Nylon
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed
Production lead time	2-3 weeks after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width, colour and put-up set per order
Lot report issued against the production lot
Samples cut to width in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

Size	Colour	MOQ
	Black	500 pcs stock colour / 3,000 pcs dyed
x 3 m		500 pcs stock colour / 3,000 pcs dyed
	Black	500 pcs stock colour / 3,000 pcs dyed
	Red	500 pcs stock colour / 3,000 pcs dyed
		500 pcs stock colour / 3,000 pcs dyed
12 mm	Black	500 pcs stock colour / 3,000 pcs dyed
15 mm	Red	500 pcs stock colour / 3,000 pcs dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.02 – 0.35 / pcFOB Xiamen · varies with width and order quantity

These are adhesive hook and loop dots, supplied on a continuous liner in Black at 10 mm. The cut is kiss-cut by default; through-cut loose parts are available where the parts are applied by hand. At 10 mm across, the part is small enough to be applied by hand or picked straight off the liner, and the engaged area is set by the diameter rather than by how much the operator pulls.

Where it is used

It is specified where a large tape face would be wasteful: small parts, tight corners, and products where the closure area is fixed by the design rather than by the operator. The diameter, not the length, is the dimension that sets the peel.

Ordering

Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.

How to specify it

For a first order we normally send a cut sample at your width plus the lot report from the run it came from. That way the sample and the bulk goods are the same construction, which is not always true when a sample comes from a different mill.

Quality control

Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.

Packing and shipping

We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.

Ask for a sample cut to your width; it ships in seven days and it is the fastest way to settle a substrate or colour question. Send the substrate with the request if the bond is the open question, and we will test on your material rather than on ours.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Order by the profile, not the diameter: a round coin suits a drilled or moulded seat, a square resists rotation better on a flat panel, and a custom die-cut shape is what you specify when the part has to be applied the same way every time without a jig. Tooling is a one-off and typically takes 7–10 working days.

Read next Specifying die-cut hook and loop parts

Common questions

What is 10 mm hook and loop used for?

At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Kiss-cut or loose parts?

Kiss-cut keeps the parts on a continuous liner for dispensers and pick-and-place heads. Through-cut gives loose parts in a bag, which is cheaper and fine for manual assembly. Tell us which line you are feeding and we will quote the matching format.

What tolerance can you hold?

±0.3 mm on the cut profile and ±0.5 mm on position within the web. Tighter than that is a conversation, not a catalogue item. Watch the adhesive bleed as well: a soft acrylic can creep 0.2 mm past the cut edge in warm storage.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Dots, Coins and Die-Cut Shapes

Dots, Coins and Die-Cut Shapes 12 mm Adhesive Hook and Loop Dots, Black Adhesive Hook and Loop Dots at 12 mm in Black. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Adhesive Hook and Loop Dots, Red Adhesive Hook and Loop Dots in Red. Woven hook and loop, samples in 7 days, MO... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Double-Sided Adhesive Hook and Loop Dots, Bulk Roll Double-Sided Adhesive Hook and Loop Dots in stock colours. Woven hook and loop... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Waterproof Adhesive Hook and Loop Dots Waterproof Adhesive Hook and Loop Dots in stock colours. Woven hook and loop,... MOQ 500 pcs stock colour / 3,000 pcs dyed