Buckles and Webbing

20 mm Hook and Loop Buckle, Black

Hook and Loop Buckle (3 m) at 20 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Width20 mm
ColourBlack
Length3 m
ConstructionHook and Loop Buckle
Minimum order500 pcs stock colour / 3,000 pcs dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width20 mm
ColourBlack
Length3 m
ConstructionHook and Loop Buckle
MOQ500 pcs stock colour / 3,000 pcs dyed
Minimum order500 pcs stock colour / 3,000 pcs dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width, colour and put-up set per order
  • Lot report issued against the production lot
  • Samples cut to width in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
x 3 m 500 pcs stock colour / 3,000 pcs dyed
25 mm x 3 m Black 500 pcs stock colour / 3,000 pcs dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.15 – 1.80 / pcFOB Xiamen · varies with width and order quantity

A made-up hook and loop buckle at 20 mm in Black, with a side-release or wire buckle depending on whether the strap is opened by hand or set once and left. 20 mm is the commonest strap width: enough face to hold a coil of hose or a bundle of tube, and narrow enough to pass through a bracket or a D-ring without folding over on itself.

Where it is used

It goes onto webbing that is woven, stitched or welded to the strap body. The buckle has to be rated for the strap width and for the direction of pull; a side-release loaded from the wrong side will open under tension.

Ordering

Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.

How to specify it

To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.

Quality control

Each carton is labelled with the lot number, width, colour and quantity, and the lot report references the same number. That is what makes a claim traceable six months later instead of a conversation about photographs.

Packing and shipping

Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.

Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

The buckle has to match the webbing width exactly — a 25 mm buckle on 25 mm webbing is correct, on 20 mm webbing it slides. Metal wire buckles suit sewn-free assemblies; plastic side-release buckles suit anything the end user opens by hand.

Common questions

What is 20 mm hook and loop used for?

At 20 mm this construction is normally specified for general closures, bags, packaging, display mounting and low-load bundling. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Will the buckle fit my webbing?

Only if the widths match exactly. A 25 mm buckle on 25 mm webbing is correct; the same buckle on 20 mm webbing slides under load. We can supply webbing and buckle together so the fit is guaranteed rather than assumed.

Metal or plastic?

Zinc-plated wire buckles suit sewn-free assemblies and hold a hard tension. POM side-release buckles are what end users expect to open by hand, and they do not corrode. Neither is stronger in the abstract — it depends on whether the strap is adjusted by a machine or a person.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Buckles and Webbing

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP