Self-Adhesive Hook and Loop

16 mm Double-Sided Heavy-Duty Self-Adhesive Hook and Loop Tape

Double-Sided Heavy-Duty Self-Adhesive Hook and Loop Tape at 16 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width16 mm
ColourBlack
AdhesiveAcrylic
ConstructionSelf-Adhesive Hook and Loop Tape
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width16 mm
ColourBlack
AdhesiveAcrylic
ConstructionSelf-Adhesive Hook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width, colour and put-up set per order
  • Lot report issued against the production lot
  • Samples cut to width in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
500 m stock colour / 3,000 m dyed
Black 500 m stock colour / 3,000 m dyed
500 m stock colour / 3,000 m dyed
10 mm Black 500 m stock colour / 3,000 m dyed
12 mm Black 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.08 – 1.20 / mFOB Xiamen · varies with width and order quantity

Peel-and-stick self-adhesive hook and loop tape: a woven hook and loop face on an acrylic adhesive, supplied 16 mm wide in Black on a release liner that runs the full length of the roll. At 16 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.

Where it is used

It goes onto aluminium frames, painted steel cabinets, glass partitions and laminated board. Clean the surface with isopropyl alcohol first; dust and mould release agents are the two most common reasons a bond fails in the first week.

Ordering

Width, colour and put-up are set per order, so a mixed carton is normal rather than an exception. Minimum order is 500 m stock colour / 3,000 m dyed, and the master roll exists after the first run, which means a repeat order on the same construction does not add lead time.

How to specify it

To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.

Quality control

Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.

Packing and shipping

We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.

If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.

Common questions

What is 16 mm hook and loop used for?

At 16 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Will it stick to plastic crates or powder-coated metal?

Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.

How long before I can load it?

Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Self-Adhesive Hook and Loop

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP