Self-Adhesive Hook and Loop

100 mm Double-Sided Mounting Self-Adhesive Hook and Loop Tape, Black

Double-Sided Mounting Self-Adhesive Hook and Loop Tape at 100 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width100 mm
ColourBlack
AdhesiveAcrylic
ConstructionSelf-Adhesive Hook and Loop Tape
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width100 mm
ColourBlack
AdhesiveAcrylic
ConstructionSelf-Adhesive Hook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.08 – 1.20 / mFOB Xiamen · varies with width and order quantity

Self-adhesive hook and loop tape in Black at 100 mm, coated with a solvent acrylic rather than a hot melt, which is what keeps the bond from creeping when the panel sits in a warm vehicle or a sunlit window. 100 mm is at the top of the slitting range. Rolls get heavy and stiffness rises, so check that your applicator can carry the roll before you commit to this width for a full run.

Where it is used

Common assemblies are headliners and interior trim, van and caravan fit-out, point-of-sale display, and temporary signage that has to come off without leaving adhesive. Wide tape spreads the load on the panel; narrow tape is used along edges and returns.

Ordering

Quotations are built from three things: the construction, the width and the colour. Change any one of them and the price moves, which is why we ask for all three before quoting rather than sending a range and adjusting afterwards.

How to specify it

Colour is the one specification that is cheapest to settle early and most expensive to settle late. Send a physical swatch if the colour is critical; a hex value on a screen will match under one light and fail under another.

Quality control

Aesthetics are inspected on the full roll, not on a cut sample: weft skew, oil marks and hook damage are all visible at speed and all of them are reject criteria if your line is automated.

Packing and shipping

We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.

If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.

Common questions

What is 100 mm hook and loop used for?

At 100 mm this construction is normally specified for industrial fixing, wide panel mounting and heavy equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Will it stick to plastic crates or powder-coated metal?

Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.

How long before I can load it?

Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Self-Adhesive Hook and Loop

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP