Elastic Hook and Loop Tape at 10 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 10 mm |
| Colour | Black |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 10 mm |
|---|---|
| Colour | Black |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 80 mm | Black | 500 m stock colour / 3,000 m dyed |
| 500 m stock colour / 3,000 m dyed | ||
| 500 m stock colour / 3,000 m dyed | ||
| Black | 500 m stock colour / 3,000 m dyed | |
| 12 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Black | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerMaster-roll hook and loop tape at 10 mm in Black, supplied unlined or with a release liner, for customers who slit, laminate or die-cut in-house. At 10 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.
Typical uses are high-volume assembly where the tape is applied by machine, and distribution where the roll is re-sold or re-cut. Master rolls are quoted separately from slit rolls because the slitting, not the weaving, sets the price at volume.
Quotations are built from three things: the construction, the width and the colour. Change any one of them and the price moves, which is why we ask for all three before quoting rather than sending a range and adjusting afterwards.
Colour is the one specification that is cheapest to settle early and most expensive to settle late. Send a physical swatch if the colour is critical; a hex value on a screen will match under one light and fail under another.
Peel is tested on the finished lot, not on a sample kept from the previous run. If your incoming inspection uses a different pull speed or a different dwell time, tell us and we will match it so the two numbers are comparable.
Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.
If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.
Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.
At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.
Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Rolls and Back-to-Back
Double-Sided Hook and Loop Tape, Black
Double-Sided Hook and Loop Tape in Black. Woven hook and loop, samples in 7 da...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Mounting Hook and Loop Tape
Mounting Hook and Loop Tape in stock colours. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
30 mm Nylon Hook and Loop Tape, Black
Hook and Loop Tape at 30 mm in Black. Woven hook and loop, samples in 7 days,...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Back-to-Back Hook and Loop Tape
Back-to-Back Hook and Loop Tape in stock colours. Woven hook and loop, samples...
MOQ 500 m stock colour / 3,000 m dyed