Hook and Loop Strap at 20 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 pcs.
| Width | 20 mm |
| Colour | Black |
| Construction | Hook and Loop Strap |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 20 mm |
|---|---|
| Colour | Black |
| Construction | Hook and Loop Strap |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 16 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
| 150 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
| 300 mm | 500 pcs stock colour / 3,000 pcs dyed | |
| Green | 500 pcs stock colour / 3,000 pcs dyed | |
| 300 mm | 500 pcs stock colour / 3,000 pcs dyed | |
| Black | 500 pcs stock colour / 3,000 pcs dyed | |
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 20 mm | 500 pcs stock colour / 3,000 pcs dyed | |
| 38 mm | 500 m stock colour / 3,000 m dyed | |
| 38 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerHook and loop strap made up and ready to use, 20 mm wide in Black, with the hook and loop sewn back-to-back so the strap closes on itself at any point along its length. 20 mm is the commonest strap width: enough face to hold a coil of hose or a bundle of tube, and narrow enough to pass through a bracket or a D-ring without folding over on itself.
Common assemblies are roll and coil restraint, tent and tarpaulin tie-down, medical and physio cuffs, and ski and board straps. The working length is what you should quote, not the flat length — a strap has to pass through the hardware before it closes.
Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.
If the width is still open, send the part, the drawing or a photograph with a ruler in it. Choosing between 20 mm and 25 mm on a photograph alone is guesswork, and the difference matters at the edge where the peel starts.
Each carton is labelled with the lot number, width, colour and quantity, and the lot report references the same number. That is what makes a claim traceable six months later instead of a conversation about photographs.
Packing is poly bag plus carton as standard. For humid destinations we add a desiccant and a moisture-barrier bag, because a nylon roll that takes up water in transit will measure wide on arrival and settle back a week later.
Send the width, the colour and the application and we will quote against a real construction rather than a catalogue range. If you are comparing two suppliers, send both quotes and we will tell you which line item is the one that will move.
Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.
At 20 mm this construction is normally specified for general closures, bags, packaging, display mounting and low-load bundling. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.
Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.
Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Straps, Ties and Cinches
Reusable Hook and Loop Strap, Arrival Customized
Reusable Hook and Loop Strap in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Reusable Hook and Loop Strap, Cable
Reusable Hook and Loop Strap in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Hook and Loop Strap
Hook and Loop Strap in stock colours. Woven hook and loop, samples in 7 days,...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Elastic Heavy-Duty Hook and Loop Strap, Cut to Length
Elastic Heavy-Duty Hook and Loop Strap in stock colours. Woven hook and loop,...
MOQ 500 pcs stock colour / 3,000 pcs dyed