Straps, Ties and Cinches

Hook and Loop Strap – Factory Manufacture

Hook and Loop Strap in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Construction	Hook and Loop Strap
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Construction	Hook and Loop Strap
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed
Production lead time	15-25 days after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width and colour set per order
Lot report with every carton
Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.10 – 1.20 / pcFOB Xiamen · varies with width and order quantity

Ready-made hook and loop strap: 10-150 mm wide, a stock colour, with a sewn or welded end so the strap does not fray in service and can be pulled tight without the edge opening up. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.

Where it is used

It goes onto racks, trolleys, pipe bundles and machine covers. Wide straps spread pressure on soft or crushable loads; narrow straps are used where the bundle is small and the strap has to pass through a tight gap.

Ordering

Order quantity is quoted in metres or pieces depending on the construction, and we will convert between them if your system counts the other way. Mixed widths on one purchase order are handled as separate lines with a shared lead time.

How to specify it

Colour is the one specification that is cheapest to settle early and most expensive to settle late. Send a physical swatch if the colour is critical; a hex value on a screen will match under one light and fail under another.

Quality control

Aesthetics are inspected on the full roll, not on a cut sample: weft skew, oil marks and hook damage are all visible at speed and all of them are reject criteria if your line is automated.

Packing and shipping

Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.

If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.

Read next How hook and loop actually works

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Buckle or tie — which one?

A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.

Can the straps be printed with our logo?

Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.

More in Straps, Ties and Cinches

Straps, Ties and Cinches Reusable Hook and Loop Strap – Reusable Custom Reusable Hook and Loop Strap in stock colours. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Straps, Ties and Cinches Heavy-Duty Reusable Hook and Loop Strap – 10 mm, Black Heavy-Duty Reusable Hook and Loop Strap at 10 mm in Black. Woven hook and loop... MOQ 500 pcs stock colour / 3,000 pcs dyed

Straps, Ties and Cinches Reflective Reusable Hook and Loop Strap Reflective Reusable Hook and Loop Strap in stock colours. Woven hook and loop,... MOQ 500 pcs stock colour / 3,000 pcs dyed

Straps, Ties and Cinches Double-Sided Hook and Loop Strap (Nylon) Double-Sided Hook and Loop Strap (Nylon) in stock colours. Woven hook and loop... MOQ 500 pcs stock colour / 3,000 pcs dyed