Straps, Ties and Cinches

Nylon Hook and Loop Strap

Hook and Loop Strap (Nylon) in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

MaterialNylon
ConstructionHook and Loop Strap
MOQ500 pcs stock colour / 3,000 pcs dyed
Minimum order500 pcs stock colour / 3,000 pcs dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

MaterialNylon
ConstructionHook and Loop Strap
MOQ500 pcs stock colour / 3,000 pcs dyed
Minimum order500 pcs stock colour / 3,000 pcs dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
16 mm Black 500 pcs stock colour / 3,000 pcs dyed
150 mm Black 500 pcs stock colour / 3,000 pcs dyed
300 mm 500 pcs stock colour / 3,000 pcs dyed
Green 500 pcs stock colour / 3,000 pcs dyed
300 mm 500 pcs stock colour / 3,000 pcs dyed
Black 500 pcs stock colour / 3,000 pcs dyed
500 pcs stock colour / 3,000 pcs dyed
20 mm 500 pcs stock colour / 3,000 pcs dyed
38 mm 500 m stock colour / 3,000 m dyed
38 mm Black 500 pcs stock colour / 3,000 pcs dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.10 – 1.20 / pcFOB Xiamen · varies with width and order quantity

Hook and loop strap made up and ready to use, 10-150 mm wide in a stock colour, with the hook and loop sewn back-to-back so the strap closes on itself at any point along its length. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.

Where it is used

It is used for cable and hose management in plant rooms and on vehicles, for bundling timber and tube on site, and for securing loads inside vans and containers. Where the strap has to stay tight under load without re-adjustment, specify a buckle rather than a plain tie.

Ordering

Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.

How to specify it

The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.

Quality control

Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.

Packing and shipping

Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.

Send the width, the colour and the application and we will quote against a real construction rather than a catalogue range. If you are comparing two suppliers, send both quotes and we will tell you which line item is the one that will move.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Buckle or tie — which one?

A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.

Can the straps be printed with our logo?

Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Straps, Ties and Cinches

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP