Straps, Ties and Cinches

Hook and Loop Strap, Quality Bright

Hook and Loop Strap in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

MaterialNylon
ConstructionHook and Loop Strap
MOQ500 pcs stock colour / 3,000 pcs dyed
Minimum order500 pcs stock colour / 3,000 pcs dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

MaterialNylon
ConstructionHook and Loop Strap
MOQ500 pcs stock colour / 3,000 pcs dyed
Minimum order500 pcs stock colour / 3,000 pcs dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.10 – 1.20 / pcFOB Xiamen · varies with width and order quantity

A hook and loop strap at 10-150 mm in a stock colour, built for repeated opening by hand. The hook face is sized to the loop face so the strap does not over-travel and leave a bare hook edge exposed. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.

Where it is used

Common assemblies are roll and coil restraint, tent and tarpaulin tie-down, medical and physio cuffs, and ski and board straps. The working length is what you should quote, not the flat length — a strap has to pass through the hardware before it closes.

Ordering

Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.

How to specify it

Colour is the one specification that is cheapest to settle early and most expensive to settle late. Send a physical swatch if the colour is critical; a hex value on a screen will match under one light and fail under another.

Quality control

Peel is tested on the finished lot, not on a sample kept from the previous run. If your incoming inspection uses a different pull speed or a different dwell time, tell us and we will match it so the two numbers are comparable.

Packing and shipping

We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.

If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Buckle or tie — which one?

A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.

Can the straps be printed with our logo?

Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Straps, Ties and Cinches

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP