Rolls and Back-to-Back

25 mm Nylon Hook and Loop Tape, White

Hook and Loop Tape at 25 mm in White. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width25 mm
ColourWhite
MaterialNylon
ConstructionHook and Loop Tape
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width25 mm
ColourWhite
MaterialNylon
ConstructionHook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
50 mm Green 500 m stock colour / 3,000 m dyed
12 mm Green 500 m stock colour / 3,000 m dyed
20 mm Black 500 m stock colour / 3,000 m dyed
16 mm Green 500 m stock colour / 3,000 m dyed
50 mm 500 m stock colour / 3,000 m dyed
40 mm Red 500 m stock colour / 3,000 m dyed
125 mm 500 m stock colour / 3,000 m dyed
100 mm Green 500 m stock colour / 3,000 m dyed
25 mm 500 m stock colour / 3,000 m dyed
9 mm 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.06 – 0.85 / mFOB Xiamen · varies with width and order quantity

This is the roll-goods version of hook and loop tape: 25 mm, White, held to plus or minus 0.5 mm at both the core and the outside of the roll. 25 mm is the width most often specified for closures and light bundling. It carries a normal seam allowance on both sides, so it can be stitched or stapled without the edge fraying into the stitch line.

Where it is used

Typical work is converting: slitting to a customer width, laminating to foam or film, die-cutting parts, and supplying a production line that applies tape from a roll rather than a made-up part. The web has to be consistent or the whole line drifts.

Ordering

Quotations are built from three things: the construction, the width and the colour. Change any one of them and the price moves, which is why we ask for all three before quoting rather than sending a range and adjusting afterwards.

How to specify it

If the width is still open, send the part, the drawing or a photograph with a ruler in it. Choosing between 20 mm and 25 mm on a photograph alone is guesswork, and the difference matters at the edge where the peel starts.

Quality control

Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.

Packing and shipping

We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.

If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Rolls and Back-to-Back

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP