Rolls and Back-to-Back

50 mm Polyester Hook and Loop Tape

Hook and Loop Tape at 50 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width50 mm
MaterialPolyester
ConstructionHook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width50 mm
MaterialPolyester
ConstructionHook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
10 mm 500 m stock colour / 3,000 m dyed
12 mm Green 500 m stock colour / 3,000 m dyed
50 mm Green 500 m stock colour / 3,000 m dyed
16 mm Green 500 m stock colour / 3,000 m dyed
20 mm Black 500 m stock colour / 3,000 m dyed
40 mm Red 500 m stock colour / 3,000 m dyed
125 mm 500 m stock colour / 3,000 m dyed
100 mm Green 500 m stock colour / 3,000 m dyed
25 mm 500 m stock colour / 3,000 m dyed
9 mm 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.06 – 0.85 / mFOB Xiamen · varies with width and order quantity

Bulk hook and loop tape at 50 mm in a stock colour. Every roll is splice-free in the standard 25 m put-up, and the lot report carries the width measured at both ends. 50 mm is a wide build, normally cut for panel mounting, seating and equipment covers. The extra face is what stops a large cover from lifting in the middle; it is not there to increase peel strength at the edge.

Where it is used

Typical uses are high-volume assembly where the tape is applied by machine, and distribution where the roll is re-sold or re-cut. Master rolls are quoted separately from slit rolls because the slitting, not the weaving, sets the price at volume.

Ordering

Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.

How to specify it

Tell us how the part is applied — by hand, by a laminator, or by a pick-and-place head. The answer changes the liner, the index pitch and sometimes the adhesive, and it costs nothing to specify it at the quote stage rather than after the first run.

Quality control

Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.

Packing and shipping

Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.

If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 50 mm hook and loop used for?

At 50 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Rolls and Back-to-Back

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP