Rolls and Back-to-Back

Hook and Loop Tape, 8 mm x 25 m

Hook and Loop Tape at 8 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width8 mm
Length25 m
ConstructionHook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width8 mm
Length25 m
ConstructionHook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.06 – 0.85 / mFOB Xiamen · varies with width and order quantity

Bulk hook and loop tape at 8 mm in a stock colour. Every roll is splice-free in the standard 25 m put-up, and the lot report carries the width measured at both ends. At 8 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.

Where it is used

It is specified where the width is not final: a converter buys one master width and slits to what the order needs, which is cheaper than holding six finished widths in stock and cheaper again than paying a slitting charge on every replenishment.

Ordering

Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.

How to specify it

The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.

Quality control

Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.

Packing and shipping

We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.

Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 8 mm hook and loop used for?

At 8 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Rolls and Back-to-Back

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP