Hook and Loop Tape – Dansky Sale
Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
Specification
| Construction | Hook and Loop Tape |
|---|---|
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
What makes it different
- Width and colour set per order
- Lot report with every carton
- Samples in 7 days
Other sizes in this construction
Same build, different width or length. Mixed sizes in one carton are fine.
This item is quoted individually — send the size you need.
Need a custom width or die profile?
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerAbout this product
Hook and loop tape on the roll, 10-150 mm wide in a stock colour, for lines that need a consistent web more than they need a finished part. Custom slit widths are cut from the same master, not from a re-bought roll. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.
Where it is used
It is specified where the width is not final: a converter buys one master width and slits to what the order needs, which is cheaper than holding six finished widths in stock and cheaper again than paying a slitting charge on every replenishment.
Ordering
Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.
How to specify it
Tell us how the part is applied — by hand, by a laminator, or by a pick-and-place head. The answer changes the liner, the index pitch and sometimes the adhesive, and it costs nothing to specify it at the quote stage rather than after the first run.
Quality control
Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.
Packing and shipping
Packing is poly bag plus carton as standard. For humid destinations we add a desiccant and a moisture-barrier bag, because a nylon roll that takes up water in transit will measure wide on arrival and settle back a week later.
Ask for a sample cut to your width; it ships in seven days and it is the fastest way to settle a substrate or colour question. Send the substrate with the request if the bond is the open question, and we will test on your material rather than on ours.
Ordering and shipping
- Sold by the roll, carton or pallet — mixed widths allowed.
- EXW Xiamen, FOB or CIF to your port.
- T/T 30% deposit, balance against copy of B/L.
- Sample orders ship by courier in 7 days.
Choosing this construction
Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.
Common questions
What is 25 mm hook and loop used for?
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Are the rolls spliced?
No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.
Can you slit to a width that is not on the list?
Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.
What is the minimum order and lead time?
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
More in Rolls and Back-to-Back
Rolls and Back-to-Back
Hook and Loop Tape – Black
Hook and Loop Tape in Black. Woven hook and loop, samples in 7 days, MOQ 500 m...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Elastic Hook and Loop Strap (Polyester)
Elastic Hook and Loop Strap (Polyester) in stock colours. Woven hook and loop,...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Double-Sided Hook and Loop Tape — variant 40
Double-Sided Hook and Loop Tape in stock colours. Woven hook and loop, samples...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Hook and Loop Tape – 50 mm, Green
Hook and Loop Tape at 50 mm in Green. Woven hook and loop, samples in 7 days,...
MOQ 500 m stock colour / 3,000 m dyed