Rolls and Back-to-Back

Hook and Loop Tape – Wholesale Soft

Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.

Material	Nylon
Construction	Hook and Loop Tape
MOQ	500 m stock colour / 3,000 m dyed
Minimum order	500 m stock colour / 3,000 m dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Material	Nylon
Construction	Hook and Loop Tape
MOQ	500 m stock colour / 3,000 m dyed
Minimum order	500 m stock colour / 3,000 m dyed
Production lead time	15-25 days after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width and colour set per order
Lot report with every carton
Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

This is the roll-goods version of hook and loop tape: 10-150 mm, a stock colour, held to plus or minus 0.5 mm at both the core and the outside of the roll. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.

Where it is used

Typical uses are high-volume assembly where the tape is applied by machine, and distribution where the roll is re-sold or re-cut. Master rolls are quoted separately from slit rolls because the slitting, not the weaving, sets the price at volume.

Ordering

Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.

How to specify it

For a first order we normally send a cut sample at your width plus the lot report from the run it came from. That way the sample and the bulk goods are the same construction, which is not always true when a sample comes from a different mill.

Quality control

Peel is tested on the finished lot, not on a sample kept from the previous run. If your incoming inspection uses a different pull speed or a different dwell time, tell us and we will match it so the two numbers are comparable.

Packing and shipping

Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.

If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.

More in Rolls and Back-to-Back

Rolls and Back-to-Back Magnetic Hook and Loop Tape – 16 mm, Black Magnetic Hook and Loop Tape at 16 mm in Black. Woven hook and loop, samples in... MOQ 500 m stock colour / 3,000 m dyed

Rolls and Back-to-Back Reusable Hook and Loop Tape – 16 mm, Black Reusable Hook and Loop Tape at 16 mm in Black. Woven hook and loop, samples in... MOQ 500 m stock colour / 3,000 m dyed

Rolls and Back-to-Back Hook and Loop Tape – 12 mm, Green Hook and Loop Tape at 12 mm in Green. Woven hook and loop, samples in 7 days,... MOQ 500 m stock colour / 3,000 m dyed

Rolls and Back-to-Back Hook and Loop Tape – Overlap Gallery Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, M... MOQ 500 m stock colour / 3,000 m dyed