Dots, Coins and Die-Cut Shapes

Reusable Adhesive Hook and Loop Dots

Reusable Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed
Production lead time	2-3 weeks after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width and colour set per order
Lot report with every carton
Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

Size	Colour	MOQ
	Black	500 pcs stock colour / 3,000 pcs dyed
		500 pcs stock colour / 3,000 pcs dyed
10 mm	Black	500 pcs stock colour / 3,000 pcs dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.02 – 0.35 / pcFOB Xiamen · varies with width and order quantity

These are adhesive hook and loop dots, supplied on a continuous liner in a stock colour at the standard diameters. The cut is kiss-cut by default; through-cut loose parts are available where the parts are applied by hand. Standard diameters run from 10 mm to 50 mm, and anything outside that is a new die rather than a slitting instruction. Send the drawing and we quote the tooling and the part together, because the tooling is a one-off and the part is not.

Where it is used

It is specified where a large tape face would be wasteful: small parts, tight corners, and products where the closure area is fixed by the design rather than by the operator. The diameter, not the length, is the dimension that sets the peel.

Ordering

Order quantity is quoted in metres or pieces depending on the construction, and we will convert between them if your system counts the other way. Mixed widths on one purchase order are handled as separate lines with a shared lead time.

How to specify it

Tell us how the part is applied — by hand, by a laminator, or by a pick-and-place head. The answer changes the liner, the index pitch and sometimes the adhesive, and it costs nothing to specify it at the quote stage rather than after the first run.

Quality control

Aesthetics are inspected on the full roll, not on a cut sample: weft skew, oil marks and hook damage are all visible at speed and all of them are reject criteria if your line is automated.

Packing and shipping

Packing is poly bag plus carton as standard. For humid destinations we add a desiccant and a moisture-barrier bag, because a nylon roll that takes up water in transit will measure wide on arrival and settle back a week later.

Send the annual volume with the first enquiry, even if it is a range. Volume changes the put-up, the slitting plan and sometimes the yarn, and the same construction quoted at 500 m and at 50,000 m is not the same job.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Order by the profile, not the diameter: a round coin suits a drilled or moulded seat, a square resists rotation better on a flat panel, and a custom die-cut shape is what you specify when the part has to be applied the same way every time without a jig. Tooling is a one-off and typically takes 7–10 working days.

Read next Specifying die-cut hook and loop parts

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Kiss-cut or loose parts?

Kiss-cut keeps the parts on a continuous liner for dispensers and pick-and-place heads. Through-cut gives loose parts in a bag, which is cheaper and fine for manual assembly. Tell us which line you are feeding and we will quote the matching format.

What tolerance can you hold?

±0.3 mm on the cut profile and ±0.5 mm on position within the web. Tighter than that is a conversation, not a catalogue item. Watch the adhesive bleed as well: a soft acrylic can creep 0.2 mm past the cut edge in warm storage.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Dots, Coins and Die-Cut Shapes

Dots, Coins and Die-Cut Shapes Double-Sided Adhesive Hook and Loop Dots, 25 mm round Double-Sided Adhesive Hook and Loop Dots at 25 mm in stock colours. Woven hook... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Waterproof Adhesive Hook and Loop Dots, Red Waterproof Adhesive Hook and Loop Dots in Red. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Reusable Adhesive Hook and Loop Dots, Black Reusable Adhesive Hook and Loop Dots in Black. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Double-Sided Waterproof Adhesive Hook and Loop Dots Double-Sided Waterproof Adhesive Hook and Loop Dots in stock colours. Woven ho... MOQ 500 pcs stock colour / 3,000 pcs dyed