Reusable Hook and Loop Strap in Green. Woven hook and loop, samples in 7 days, MOQ 500 pcs.
| Colour | Green |
| Adhesive | Acrylic |
| Construction | Hook and Loop Strap |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Colour | Green |
|---|---|
| Adhesive | Acrylic |
| Construction | Hook and Loop Strap |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 5 mm | 500 m stock colour / 3,000 m dyed | |
| Black | 500 pcs stock colour / 3,000 pcs dyed | |
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 10 mm | Black | 500 m stock colour / 3,000 m dyed |
| 12 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Black | 500 m stock colour / 3,000 m dyed |
| 20 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
| 25 mm | Green | 500 pcs stock colour / 3,000 pcs dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerReady-made hook and loop strap: 10-150 mm wide, Green, with a sewn or welded end so the strap does not fray in service and can be pulled tight without the edge opening up. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.
Typical uses are tree and plant ties, garden and agricultural bundling, and reusable packaging loops that replace single-use cable ties. Reusable is the point: one strap replaces hundreds of ties over a season.
Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.
For a first order we normally send a cut sample at your width plus the lot report from the run it came from. That way the sample and the bulk goods are the same construction, which is not always true when a sample comes from a different mill.
Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.
Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.
Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.
Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.
Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.
Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Straps, Ties and Cinches
Elastic Reusable Hook and Loop Strap
Elastic Reusable Hook and Loop Strap in stock colours. Woven hook and loop, sa...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
16 mm Elastic Heavy-Duty Hook and Loop Strap, Black
Elastic Heavy-Duty Hook and Loop Strap at 16 mm in Black. Woven hook and loop,...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Silicone-Coated Hook and Loop Strap, Anti Slip
Silicone-Coated Hook and Loop Strap in stock colours. Woven hook and loop, sam...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Double-Sided Hook and Loop Strap, Slit to Order
Double-Sided Hook and Loop Strap in stock colours. Woven hook and loop, sample...
MOQ 500 pcs stock colour / 3,000 pcs dyed