Self-Adhesive Hook and Loop Tape at 20 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 20 mm |
| Material | Nylon |
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 20 mm |
|---|---|
| Material | Nylon |
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| Black | 500 m stock colour / 3,000 m dyed | |
| 10 mm | 500 m stock colour / 3,000 m dyed | |
| 500 m stock colour / 3,000 m dyed | ||
| 15 mm | 500 m stock colour / 3,000 m dyed | |
| 12 mm | Black | 500 m stock colour / 3,000 m dyed |
| Black | 500 m stock colour / 3,000 m dyed | |
| 16 mm | Black | 500 m stock colour / 3,000 m dyed |
| 100 mm | 500 m stock colour / 3,000 m dyed | |
| 30 mm | Green | 500 m stock colour / 3,000 m dyed |
| 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerSelf-adhesive hook and loop tape in a stock colour at 20 mm, coated with a solvent acrylic rather than a hot melt, which is what keeps the bond from creeping when the panel sits in a warm vehicle or a sunlit window. 20 mm is the width most often specified for closures and light bundling. It carries a normal seam allowance on both sides, so it can be stitched or stapled without the edge fraying into the stitch line.
Common assemblies are headliners and interior trim, van and caravan fit-out, point-of-sale display, and temporary signage that has to come off without leaving adhesive. Wide tape spreads the load on the panel; narrow tape is used along edges and returns.
Quotations are built from three things: the construction, the width and the colour. Change any one of them and the price moves, which is why we ask for all three before quoting rather than sending a range and adjusting afterwards.
To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.
Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.
We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.
Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
At 20 mm this construction is normally specified for general closures, bags, packaging, display mounting and low-load bundling. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
Self-Adhesive Hook and Loop
Double-Sided Reusable Self-Adhesive Hook and Loop Tape – Black
Double-Sided Reusable Self-Adhesive Hook and Loop Tape in Black. Woven hook an...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Double-Sided Self-Adhesive Hook and Loop Tape – 12 mm, Black
Double-Sided Self-Adhesive Hook and Loop Tape at 12 mm in Black. Woven hook an...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Double-Sided Self-Adhesive Hook and Loop Tape
Double-Sided Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – 12 mm, Black
Self-Adhesive Hook and Loop Tape at 12 mm in Black. Woven hook and loop, sampl...
MOQ 500 m stock colour / 3,000 m dyed