Self-Adhesive Hook and Loop

Self-Adhesive Hook and Loop Tape (25 m)

Self-Adhesive Hook and Loop Tape (25 m) in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.

Length	25 m
Material	Nylon
Adhesive	Acrylic
Construction	Self-Adhesive Hook and Loop Tape
Minimum order	500 m stock colour / 3,000 m dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Length	25 m
Material	Nylon
Adhesive	Acrylic
Construction	Self-Adhesive Hook and Loop Tape
MOQ	500 m stock colour / 3,000 m dyed
Minimum order	500 m stock colour / 3,000 m dyed
Production lead time	15-25 days after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width and colour set per order
Lot report with every carton
Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

This item is quoted individually — send the size you need.

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Self-adhesive self-adhesive hook and loop tape for panels, signage and trim: 10-150 mm wide, a stock colour, liner-backed so the part can be positioned before the adhesive is exposed. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.

Where it is used

Typical uses are mounting pads on equipment, hook and loop strips inside cases and drawers, and die-cut parts that are applied by hand on a bench. For a repeat assembly, ask for kiss-cut parts on a continuous liner so the operator peels and places in one motion.

Ordering

Order quantity is quoted in metres or pieces depending on the construction, and we will convert between them if your system counts the other way. Mixed widths on one purchase order are handled as separate lines with a shared lead time.

How to specify it

For a first order we normally send a cut sample at your width plus the lot report from the run it came from. That way the sample and the bulk goods are the same construction, which is not always true when a sample comes from a different mill.

Quality control

Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.

Packing and shipping

Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.

If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.

Common questions

What is 25 mm hook and loop used for?

At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Will it stick to plastic crates or powder-coated metal?

Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.

How long before I can load it?

Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.

More in Self-Adhesive Hook and Loop

Self-Adhesive Hook and Loop Double-Sided Self-Adhesive Hook and Loop Tape – Black Double-Sided Self-Adhesive Hook and Loop Tape in Black. Woven hook and loop, s... MOQ 500 m stock colour / 3,000 m dyed

Self-Adhesive Hook and Loop Heavy-Duty Self-Adhesive Hook and Loop Tape Heavy-Duty Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and l... MOQ 500 m stock colour / 3,000 m dyed

Self-Adhesive Hook and Loop Double-Sided Ski Self-Adhesive Hook and Loop Tape Double-Sided Ski Self-Adhesive Hook and Loop Tape in stock colours. Woven hook... MOQ 500 m stock colour / 3,000 m dyed

Self-Adhesive Hook and Loop Elastic Self-Adhesive Hook and Loop Tape — variant 245 Elastic Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and loop... MOQ 500 m stock colour / 3,000 m dyed