Self-Adhesive Hook and Loop Tape at 25 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 25 mm |
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 25 mm |
|---|---|
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| Black | 500 m stock colour / 3,000 m dyed | |
| 10 mm | 500 m stock colour / 3,000 m dyed | |
| 500 m stock colour / 3,000 m dyed | ||
| 15 mm | 500 m stock colour / 3,000 m dyed | |
| 12 mm | Black | 500 m stock colour / 3,000 m dyed |
| Black | 500 m stock colour / 3,000 m dyed | |
| 16 mm | Black | 500 m stock colour / 3,000 m dyed |
| 100 mm | 500 m stock colour / 3,000 m dyed | |
| 30 mm | Green | 500 m stock colour / 3,000 m dyed |
| 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerThis is the mounting version of self-adhesive hook and loop tape — no stitching, no rivets, applied by hand or by a laminator. 25 mm, a stock colour, with a heavy-tack acrylic that grips porous and painted surfaces. 25 mm is the width most often specified for closures and light bundling. It carries a normal seam allowance on both sides, so it can be stitched or stapled without the edge fraying into the stitch line.
Typical work is fixing panels, signs, trim and access covers to metal, painted board, glass and most plastics. What decides success is the substrate, not the tape: powder coat and acrylic hold well, polypropylene and polyethylene have too little surface energy and will release under load.
Width, colour and put-up are set per order, so a mixed carton is normal rather than an exception. Minimum order is 500 m stock colour / 3,000 m dyed, and the master roll exists after the first run, which means a repeat order on the same construction does not add lead time.
The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.
Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.
Pallets are built to a 1,100 mm footprint and strapped, with corner boards on export shipments. If your warehouse takes a different pallet, say so at the quote stage — re-palletising at the port is charged by the hour.
Send the annual volume with the first enquiry, even if it is a range. Volume changes the put-up, the slitting plan and sometimes the yarn, and the same construction quoted at 500 m and at 50,000 m is not the same job.
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – 38 mm, Black
Self-Adhesive Hook and Loop Tape at 38 mm in Black. Woven hook and loop, sampl...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Heavy-Duty Self-Adhesive Hook and Loop Tape – 12 mm, White
Heavy-Duty Self-Adhesive Hook and Loop Tape at 12 mm in White. Woven hook and...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Ski Self-Adhesive Hook and Loop Tape
Ski Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and loop, sa...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Double-Sided Self-Adhesive Hook and Loop Tape – 10 mm, Black
Double-Sided Self-Adhesive Hook and Loop Tape at 10 mm in Black. Woven hook an...
MOQ 500 m stock colour / 3,000 m dyed