Sew-On Hook and Loop Tape at 25 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 25 mm |
| Construction | Sew-On Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 25 mm |
|---|---|
| Construction | Sew-On Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 16 mm | 500 m stock colour / 3,000 m dyed | |
| Black | 500 m stock colour / 3,000 m dyed | |
| Grey | 500 m stock colour / 3,000 m dyed | |
| Black | 500 m stock colour / 3,000 m dyed | |
| 50 mm | 500 m stock colour / 3,000 m dyed | |
| 500 m stock colour / 3,000 m dyed | ||
| 500 m stock colour / 3,000 m dyed | ||
| 150 mm | Black | 500 m stock colour / 3,000 m dyed |
| 500 m stock colour / 3,000 m dyed | ||
| 20 mm | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerThis is the stitch-in version of sew-on hook and loop tape: no adhesive, no liner, just a woven edge that will not curl when the seam is pressed. Supplied 25 mm wide in a stock colour. 25 mm is the width most often specified for closures and light bundling. It carries a normal seam allowance on both sides, so it can be stitched or stapled without the edge fraying into the stitch line.
Typical uses are adjustable straps that are sewn rather than buckled, protective covers with a full-length opening, and play and pet products where the closure is cycled far more often than a garment closure ever is.
We quote EXW, FOB and CIF on the same sheet so you can compare against your forwarder rather than against our freight. Payment is 30 percent deposit with the balance against a copy of the bill of lading.
For a first order we normally send a cut sample at your width plus the lot report from the run it came from. That way the sample and the bulk goods are the same construction, which is not always true when a sample comes from a different mill.
Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.
Liner-backed goods are packed flat rather than on a core where the part is kiss-cut, because a tight wind puts a set into the liner and the parts lift at the edges on the applicator.
If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.
Width is set by the seam, not by the load: 16–20 mm for apparel and light closures, 25–38 mm for bags and upholstery, 50 mm and above where the joint has to stay flat under load. Stitch through the tape, not beside it — a seam that stops short of the edge lets the corner lift and start a peel.
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Nylon tape survives repeated washing at 40 °C; colour fastness holds grade 4 after five washes on the dyed line. Dry cleaning solvents attack the hook monofilament over time, so specify polyester if the garment is dry-cleaned commercially. Stitch through the tape so the seam, not the adhesive, carries the load.
Yes. Every roll is supplied as a matched hook and loop pair unless you ask for single-sided hook or loop only, which we also supply for converters who already stock the other half.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Sew-On Hook and Loop Tape
Elastic Reflective Sew-On Hook and Loop Tape
Elastic Reflective Sew-On Hook and Loop Tape in stock colours. Woven hook and...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
Heavy-Duty Reusable Sew-On Hook and Loop Tape
Heavy-Duty Reusable Sew-On Hook and Loop Tape in stock colours. Woven hook and...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
12 mm Medical Sew-On Hook and Loop Tape, Black
Medical Sew-On Hook and Loop Tape at 12 mm in Black. Woven hook and loop, samp...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
50 mm Sew-On Hook and Loop Tape
Sew-On Hook and Loop Tape at 50 mm in stock colours. Woven hook and loop, samp...
MOQ 500 m stock colour / 3,000 m dyed