Adhesive Hook and Loop Dots, Black
Adhesive Hook and Loop Dots in Black. Woven hook and loop, samples in 7 days, MOQ 500 pcs.
| Colour | Black |
| Material | Nylon |
| Construction | Adhesive Hook and Loop Dots |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
Specification
| Colour | Black |
|---|---|
| Material | Nylon |
| Construction | Adhesive Hook and Loop Dots |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
What makes it different
- Width and colour set per order
- Lot report with every carton
- Samples in 7 days
Other sizes in this construction
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| Black | 500 pcs stock colour / 3,000 pcs dyed | |
| x 3 m | 500 pcs stock colour / 3,000 pcs dyed | |
| Red | 500 pcs stock colour / 3,000 pcs dyed | |
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 10 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
| 12 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
| 15 mm | Red | 500 pcs stock colour / 3,000 pcs dyed |
Need a custom width or die profile?
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerAbout this product
Adhesive hook and loop dots in Black at the standard diameters, die-cut from the same woven tape as the roll goods, which means the hook density and the peel per unit area match the strip product exactly. Standard diameters run from 10 mm to 50 mm, and anything outside that is a new die rather than a slitting instruction. Send the drawing and we quote the tooling and the part together, because the tooling is a one-off and the part is not.
Where it is used
Typical work is fixing small parts in a repeat assembly: sensor pads, cable clips, badge holders, and removable panels on consumer products. The liner is what makes it a production part rather than a repair item — the operator peels and places in one motion.
Ordering
Width, colour and put-up are set per order, so a mixed carton is normal rather than an exception. Minimum order is 500 pcs stock colour / 3,000 pcs dyed, and the master roll exists after the first run, which means a repeat order on the same construction does not add lead time.
How to specify it
If the width is still open, send the part, the drawing or a photograph with a ruler in it. Choosing between 20 mm and 25 mm on a photograph alone is guesswork, and the difference matters at the edge where the peel starts.
Quality control
Each carton is labelled with the lot number, width, colour and quantity, and the lot report references the same number. That is what makes a claim traceable six months later instead of a conversation about photographs.
Packing and shipping
Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.
Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.
Ordering and shipping
- Sold by the roll, carton or pallet — mixed widths allowed.
- EXW Xiamen, FOB or CIF to your port.
- T/T 30% deposit, balance against copy of B/L.
- Sample orders ship by courier in 7 days.
Choosing this construction
Order by the profile, not the diameter: a round coin suits a drilled or moulded seat, a square resists rotation better on a flat panel, and a custom die-cut shape is what you specify when the part has to be applied the same way every time without a jig. Tooling is a one-off and typically takes 7–10 working days.
Common questions
What is 25 mm hook and loop used for?
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Kiss-cut or loose parts?
Kiss-cut keeps the parts on a continuous liner for dispensers and pick-and-place heads. Through-cut gives loose parts in a bag, which is cheaper and fine for manual assembly. Tell us which line you are feeding and we will quote the matching format.
What tolerance can you hold?
±0.3 mm on the cut profile and ±0.5 mm on position within the web. Tighter than that is a conversation, not a catalogue item. Watch the adhesive bleed as well: a soft acrylic can creep 0.2 mm past the cut edge in warm storage.
What is the minimum order and lead time?
Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
More in Dots, Coins and Die-Cut Shapes
Dots, Coins and Die-Cut Shapes
Adhesive Hook and Loop Dots, Carpet Markers
Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Dots, Coins and Die-Cut Shapes
Waterproof Adhesive Hook and Loop Dots
Waterproof Adhesive Hook and Loop Dots in stock colours. Woven hook and loop,...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Dots, Coins and Die-Cut Shapes
Adhesive Hook and Loop Dots, Industrial Quality
Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Dots, Coins and Die-Cut Shapes
Double-Sided Adhesive Hook and Loop Dots
Double-Sided Adhesive Hook and Loop Dots in stock colours. Woven hook and loop...
MOQ 500 pcs stock colour / 3,000 pcs dyed