Dots, Coins and Die-Cut Shapes

10 mm Reusable Adhesive Hook and Loop Dots, Black

Reusable Adhesive Hook and Loop Dots at 10 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 pcs.

Width	10 mm
Colour	Black
Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
Minimum order	500 pcs stock colour / 3,000 pcs dyed

Request a quote Request a sample

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width	10 mm
Colour	Black
Adhesive	Acrylic
Construction	Adhesive Hook and Loop Dots
MOQ	500 pcs stock colour / 3,000 pcs dyed
Minimum order	500 pcs stock colour / 3,000 pcs dyed
Production lead time	2-3 weeks after sample approval
Packing	Poly bag + carton, palletised for LCL
Certification	REACH, RoHS; OEKO-TEX on request

What makes it different

Width, colour and put-up set per order
Lot report issued against the production lot
Samples cut to width in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

Size	Colour	MOQ
	Black	500 pcs stock colour / 3,000 pcs dyed
		500 pcs stock colour / 3,000 pcs dyed
		500 pcs stock colour / 3,000 pcs dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.02 – 0.35 / pcFOB Xiamen · varies with width and order quantity

These are adhesive hook and loop dots, supplied on a continuous liner in Black at 10 mm. The cut is kiss-cut by default; through-cut loose parts are available where the parts are applied by hand. At 10 mm across, the part is small enough to be applied by hand or picked straight off the liner, and the engaged area is set by the diameter rather than by how much the operator pulls.

Where it is used

Typical uses are removable mounting of small signage, cable pads on painted walls, and assembly jigs that need a consumable with a known peel. Thicker acrylic coatings are quoted for rough or textured surfaces.

Ordering

Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.

How to specify it

Colour is the one specification that is cheapest to settle early and most expensive to settle late. Send a physical swatch if the colour is critical; a hex value on a screen will match under one light and fail under another.

Quality control

Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.

Packing and shipping

Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.

Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.

Ordering and shipping

Sold by the roll, carton or pallet — mixed widths allowed.
EXW Xiamen, FOB or CIF to your port.
T/T 30% deposit, balance against copy of B/L.
Sample orders ship by courier in 7 days.

Choosing this construction

Order by the profile, not the diameter: a round coin suits a drilled or moulded seat, a square resists rotation better on a flat panel, and a custom die-cut shape is what you specify when the part has to be applied the same way every time without a jig. Tooling is a one-off and typically takes 7–10 working days.

Read next Specifying die-cut hook and loop parts

Common questions

What is 10 mm hook and loop used for?

At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Kiss-cut or loose parts?

Kiss-cut keeps the parts on a continuous liner for dispensers and pick-and-place heads. Through-cut gives loose parts in a bag, which is cheaper and fine for manual assembly. Tell us which line you are feeding and we will quote the matching format.

What tolerance can you hold?

±0.3 mm on the cut profile and ±0.5 mm on position within the web. Tighter than that is a conversation, not a catalogue item. Watch the adhesive bleed as well: a soft acrylic can creep 0.2 mm past the cut edge in warm storage.

What is the minimum order and lead time?

Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Dots, Coins and Die-Cut Shapes

Dots, Coins and Die-Cut Shapes 12 mm Adhesive Hook and Loop Dots, Black Adhesive Hook and Loop Dots at 12 mm in Black. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Adhesive Hook and Loop Dots Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, samples in... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Elastic Adhesive Hook and Loop Dots Elastic Adhesive Hook and Loop Dots in stock colours. Woven hook and loop, sam... MOQ 500 pcs stock colour / 3,000 pcs dyed

Dots, Coins and Die-Cut Shapes Double-Sided Elastic Adhesive Hook and Loop Dots Double-Sided Elastic Adhesive Hook and Loop Dots in stock colours. Woven hook... MOQ 500 pcs stock colour / 3,000 pcs dyed