Specialty and High-Performance

16 mm Double-Sided Elastic Specialty Hook and Loop, Black

Double-Sided Elastic Specialty Hook and Loop at 16 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width16 mm
ColourBlack
AdhesiveAcrylic
FeatureFlame retardant
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width16 mm
ColourBlack
AdhesiveAcrylic
FeatureFlame retardant
ConstructionSpecialty Hook and Loop
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width, colour and put-up set per order
  • Lot report issued against the production lot
  • Samples cut to width in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
Black 500 m stock colour / 3,000 m dyed
10 mm Black 500 m stock colour / 3,000 m dyed
12 mm Black 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.12 – 1.50 / mFOB Xiamen · varies with width and order quantity

Specialty hook and loop in Black at 16 mm, where the additive or the base yarn is chosen for the exposure, not for cost. The test standard is agreed before the quote, not after. At 16 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.

Where it is used

It goes onto machinery that runs hot, into equipment that is cleaned with solvents, and onto outdoor products that would otherwise chalk and lose peel within a season. UV-stable grades are a yarn choice, not a coating.

Ordering

Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.

How to specify it

To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.

Quality control

Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.

Packing and shipping

Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.

Send the width, the colour and the application and we will quote against a real construction rather than a catalogue range. If you are comparing two suppliers, send both quotes and we will tell you which line item is the one that will move.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Specify against the standard your customer audits, not against the word "specialty". FMVSS 302, UL94 V-2 and inherent aramid are three different tests with three different price points, and only one of them is the one you need.

Common questions

What is 16 mm hook and loop used for?

At 16 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Which flame standard applies to my product?

Car interiors are tested to FMVSS 302; electrical and electronic enclosures to UL94 V-2; protective clothing and welding environments normally need inherently flame-resistant meta-aramid rather than an additive. Tell us the standard your customer audits and we will quote the construction that meets it — and only that one.

Do you supply the test report with the goods?

Yes, issued against the production lot, naming the standard, the lab and the result. If a supplier offers a generic PDF with no lot reference, it will not survive an audit.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Specialty and High-Performance

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP