Hook and Loop Strap at 10 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 pcs.
| Width | 10 mm |
| Colour | Black |
| Material | Nylon |
| Construction | Hook and Loop Strap |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 10 mm |
|---|---|
| Colour | Black |
| Material | Nylon |
| Construction | Hook and Loop Strap |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 16 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
| 150 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
| 300 mm | 500 pcs stock colour / 3,000 pcs dyed | |
| Green | 500 pcs stock colour / 3,000 pcs dyed | |
| 300 mm | 500 pcs stock colour / 3,000 pcs dyed | |
| Black | 500 pcs stock colour / 3,000 pcs dyed | |
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 20 mm | 500 pcs stock colour / 3,000 pcs dyed | |
| 38 mm | 500 m stock colour / 3,000 m dyed | |
| 38 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerThis is a made-up hook and loop strap at 10 mm in Black, with the closure running the full length so the working diameter is infinitely adjustable within the strap length. At 10 mm this is a narrow strap, cut for cable and small-hose bundling. It holds a light bundle well and threads through tight gaps, but the engaged area is small, so it is not the width for a load that shifts in transit.
It is used for cable and hose management in plant rooms and on vehicles, for bundling timber and tube on site, and for securing loads inside vans and containers. Where the strap has to stay tight under load without re-adjustment, specify a buckle rather than a plain tie.
Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.
The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.
Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.
Rolls are wound on a core, bagged and packed in export cartons, palletised for LCL and shrink-wrapped for FCL. Carton marks carry your reference as well as ours if you send the format with the order.
If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.
Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.
At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.
Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.
Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Straps, Ties and Cinches
20 mm Hook and Loop Strap
Hook and Loop Strap at 20 mm in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Nylon Hook and Loop Strap
Hook and Loop Strap (Nylon) in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Hook and Loop Strap, Durable Friendly
Hook and Loop Strap in stock colours. Woven hook and loop, samples in 7 days,...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Reusable Hook and Loop Strap, Customized Adjustable
Reusable Hook and Loop Strap in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed