Reusable Hook and Loop Strap at 30 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 pcs.
| Width | 30 mm |
| Colour | Black |
| Construction | Hook and Loop Strap |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 30 mm |
|---|---|
| Colour | Black |
| Construction | Hook and Loop Strap |
| MOQ | 500 pcs stock colour / 3,000 pcs dyed |
| Minimum order | 500 pcs stock colour / 3,000 pcs dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 5 mm | 500 m stock colour / 3,000 m dyed | |
| Black | 500 pcs stock colour / 3,000 pcs dyed | |
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 500 pcs stock colour / 3,000 pcs dyed | ||
| Green | 500 pcs stock colour / 3,000 pcs dyed | |
| 500 pcs stock colour / 3,000 pcs dyed | ||
| 10 mm | Black | 500 m stock colour / 3,000 m dyed |
| 12 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Black | 500 m stock colour / 3,000 m dyed |
| 20 mm | Black | 500 pcs stock colour / 3,000 pcs dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerHook and loop strap made up and ready to use, 30 mm wide in Black, with the hook and loop sewn back-to-back so the strap closes on itself at any point along its length. At 30 mm the strap spreads pressure over a wider band, which is what matters on soft or crushable loads. It is the width to specify once a narrower strap has already left a mark on the goods.
Typical work is bundling cable, hose and tubing, cinching pallets and cartons, and holding covers on equipment that is opened daily. A strap is faster to fit than a tie and does not need a tool, which is why it wins on anything a technician touches.
Custom widths are slit from the master roll in one millimetre steps from 10 mm to 150 mm, held to plus or minus 0.5 mm. If the width is not on the list, it is a slitting instruction, not a new tool.
Tell us how the part is applied — by hand, by a laminator, or by a pick-and-place head. The answer changes the liner, the index pitch and sometimes the adhesive, and it costs nothing to specify it at the quote stage rather than after the first run.
Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.
Packing is poly bag plus carton as standard. For humid destinations we add a desiccant and a moisture-barrier bag, because a nylon roll that takes up water in transit will measure wide on arrival and settle back a week later.
Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.
Match the strap to what it wraps, not to the load alone. Bundles under 30 mm do better with 12–16 mm ties, cable runs and tool handles with 20–25 mm, and anything carrying weight with 38 mm and a buckle rather than a tie. A strap that is too wide will not cinch tight enough to stop movement.
At 30 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
A tie is faster to fit and cheaper, and is right for anything a technician opens daily. A buckle holds tension better and is what to specify when the strap has to stay tight under load without being re-adjusted. We supply both from the same webbing.
Yes, from 1,000 pieces on woven webbing. Send vector artwork; we will confirm the print area against the strap width before tooling.
Minimum order for this item is 500 pcs stock colour / 3,000 pcs dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Straps, Ties and Cinches
Hook and Loop Strap, Adjustable Releasable
Hook and Loop Strap in stock colours. Woven hook and loop, samples in 7 days,...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
Double-Sided Heavy-Duty Hook and Loop Strap
Double-Sided Heavy-Duty Hook and Loop Strap in stock colours. Woven hook and l...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
20 mm Hook and Loop Strap, Cut to Length
Hook and Loop Strap at 20 mm in stock colours. Woven hook and loop, samples in...
MOQ 500 pcs stock colour / 3,000 pcs dyed
Straps, Ties and Cinches
16 mm Double-Sided Back-to-Back Hook and Loop Strap, Green
Double-Sided Back-to-Back Hook and Loop Strap at 16 mm in Green. Woven hook an...
MOQ 500 pcs stock colour / 3,000 pcs dyed