Hook and Loop Tape at 10 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 10 mm |
| Material | Nylon |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 10 mm |
|---|---|
| Material | Nylon |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 50 mm | Green | 500 m stock colour / 3,000 m dyed |
| 12 mm | Green | 500 m stock colour / 3,000 m dyed |
| 20 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Green | 500 m stock colour / 3,000 m dyed |
| 50 mm | 500 m stock colour / 3,000 m dyed | |
| 40 mm | Red | 500 m stock colour / 3,000 m dyed |
| 125 mm | 500 m stock colour / 3,000 m dyed | |
| 100 mm | Green | 500 m stock colour / 3,000 m dyed |
| 25 mm | 500 m stock colour / 3,000 m dyed | |
| 9 mm | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerMaster-roll hook and loop tape at 10 mm in a stock colour, supplied unlined or with a release liner, for customers who slit, laminate or die-cut in-house. At 10 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.
Typical work is converting: slitting to a customer width, laminating to foam or film, die-cutting parts, and supplying a production line that applies tape from a roll rather than a made-up part. The web has to be consistent or the whole line drifts.
Order quantity is quoted in metres or pieces depending on the construction, and we will convert between them if your system counts the other way. Mixed widths on one purchase order are handled as separate lines with a shared lead time.
The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.
Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.
We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.
Send the width, the colour and the application and we will quote against a real construction rather than a catalogue range. If you are comparing two suppliers, send both quotes and we will tell you which line item is the one that will move.
Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.
At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.
Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Rolls and Back-to-Back
Elastic Heavy-Duty Hook and Loop Strap, Super Stretchy
Elastic Heavy-Duty Hook and Loop Strap in stock colours. Woven hook and loop,...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
12 mm Reusable Hook and Loop Tape, Black
Reusable Hook and Loop Tape at 12 mm in Black. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Magnetic Hook and Loop Tape, Cut to Length
Magnetic Hook and Loop Tape in stock colours. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Mounting Hook and Loop Tape
Mounting Hook and Loop Tape in stock colours. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed