Hook and Loop Tape at 150 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 150 mm |
| Colour | Black |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 150 mm |
|---|---|
| Colour | Black |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 50 mm | Green | 500 m stock colour / 3,000 m dyed |
| 12 mm | Green | 500 m stock colour / 3,000 m dyed |
| 20 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Green | 500 m stock colour / 3,000 m dyed |
| 50 mm | 500 m stock colour / 3,000 m dyed | |
| 40 mm | Red | 500 m stock colour / 3,000 m dyed |
| 125 mm | 500 m stock colour / 3,000 m dyed | |
| 100 mm | Green | 500 m stock colour / 3,000 m dyed |
| 25 mm | 500 m stock colour / 3,000 m dyed | |
| 9 mm | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerHook and loop tape in Black at 150 mm, wound under controlled tension so the roll does not telescope when it is mounted on a slitter or a laminator. 150 mm is at the top of the slitting range. Rolls get heavy and stiffness rises, so check that your applicator can carry the roll before you commit to this width for a full run.
It is used by bag and case makers, furniture producers, automotive tier suppliers and packaging converters. If you run a fixed guide, ask for the width measured at the core and at the outside of the roll on the lot report — that is where a slitting drift shows up first.
We quote EXW, FOB and CIF on the same sheet so you can compare against your forwarder rather than against our freight. Payment is 30 percent deposit with the balance against a copy of the bill of lading.
To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.
Peel is tested on the finished lot, not on a sample kept from the previous run. If your incoming inspection uses a different pull speed or a different dwell time, tell us and we will match it so the two numbers are comparable.
Liner-backed goods are packed flat rather than on a core where the part is kiss-cut, because a tight wind puts a set into the liner and the parts lift at the edges on the applicator.
Send the annual volume with the first enquiry, even if it is a range. Volume changes the put-up, the slitting plan and sometimes the yarn, and the same construction quoted at 500 m and at 50,000 m is not the same job.
Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.
At 150 mm this construction is normally specified for industrial fixing, wide panel mounting and heavy equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.
Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Rolls and Back-to-Back
9 mm Hook and Loop Tape
Hook and Loop Tape at 9 mm in stock colours. Woven hook and loop, samples in 7...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Double-Sided Mounting Hook and Loop Tape
Double-Sided Mounting Hook and Loop Tape in stock colours. Woven hook and loop...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Hook and Loop Tape, Adhesive Stickers
Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, M...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
10 mm Reusable Hook and Loop Strap, Black
Reusable Hook and Loop Strap at 10 mm in Black. Woven hook and loop, samples i...
MOQ 500 m stock colour / 3,000 m dyed