Sew-On Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Construction | Sew-On Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Construction | Sew-On Hook and Loop Tape |
|---|---|
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 16 mm | 500 m stock colour / 3,000 m dyed | |
| Black | 500 m stock colour / 3,000 m dyed | |
| Grey | 500 m stock colour / 3,000 m dyed | |
| 25 mm | 500 m stock colour / 3,000 m dyed | |
| Black | 500 m stock colour / 3,000 m dyed | |
| 50 mm | 500 m stock colour / 3,000 m dyed | |
| 500 m stock colour / 3,000 m dyed | ||
| 500 m stock colour / 3,000 m dyed | ||
| 150 mm | Black | 500 m stock colour / 3,000 m dyed |
| 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerThis is the stitch-in version of sew-on hook and loop tape: no adhesive, no liner, just a woven edge that will not curl when the seam is pressed. Supplied 10-150 mm wide in a stock colour. Stock widths are slit in one millimetre steps, so the size on your drawing is normally a slitting instruction rather than a new tool. Tell us the width and the put-up and the quote is against a stock construction.
It goes into seating, headliners, boot liners and equipment covers — anywhere a panel has to be fixed flat and then pulled off without tools. Wide tape is used on the panel face; narrow tape is used along the return edge where the cover wraps.
Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.
To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.
Every lot is checked before it leaves Fujian: width at three points along the roll, peel against the agreed window, and colour against the approved standard under D65 light. The lot report ships with the goods and names the result rather than just the specification.
Pallets are built to a 1,100 mm footprint and strapped, with corner boards on export shipments. If your warehouse takes a different pallet, say so at the quote stage — re-palletising at the port is charged by the hour.
Send the width, the colour and the application and we will quote against a real construction rather than a catalogue range. If you are comparing two suppliers, send both quotes and we will tell you which line item is the one that will move.
Width is set by the seam, not by the load: 16–20 mm for apparel and light closures, 25–38 mm for bags and upholstery, 50 mm and above where the joint has to stay flat under load. Stitch through the tape, not beside it — a seam that stops short of the edge lets the corner lift and start a peel.
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Nylon tape survives repeated washing at 40 °C; colour fastness holds grade 4 after five washes on the dyed line. Dry cleaning solvents attack the hook monofilament over time, so specify polyester if the garment is dry-cleaned commercially. Stitch through the tape so the seam, not the adhesive, carries the load.
Yes. Every roll is supplied as a matched hook and loop pair unless you ask for single-sided hook or loop only, which we also supply for converters who already stock the other half.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Sew-On Hook and Loop Tape
Sew-On Hook and Loop Tape, Custom Width
Sew-On Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
10 mm Medical Sew-On Hook and Loop Tape, Black
Medical Sew-On Hook and Loop Tape at 10 mm in Black. Woven hook and loop, samp...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
16 mm Sew-On Hook and Loop Tape
Sew-On Hook and Loop Tape at 16 mm in stock colours. Woven hook and loop, samp...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
Sew-On Hook and Loop Tape, Grey
Sew-On Hook and Loop Tape in Grey. Woven hook and loop, samples in 7 days, MOQ...
MOQ 500 m stock colour / 3,000 m dyed