Reusable Self-Adhesive Hook and Loop Tape at 16 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 16 mm |
| Colour | Black |
| Material | Nylon |
| Adhesive | Acrylic |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 16 mm |
|---|---|
| Colour | Black |
| Material | Nylon |
| Adhesive | Acrylic |
| Construction | Self-Adhesive Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 500 m stock colour / 3,000 m dyed | ||
| 500 m stock colour / 3,000 m dyed | ||
| 500 m stock colour / 3,000 m dyed | ||
| 10 mm | Black | 500 m stock colour / 3,000 m dyed |
| 12 mm | Black | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerSelf-adhesive self-adhesive hook and loop tape for panels, signage and trim: 16 mm wide, Black, liner-backed so the part can be positioned before the adhesive is exposed. At 16 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.
Common assemblies are headliners and interior trim, van and caravan fit-out, point-of-sale display, and temporary signage that has to come off without leaving adhesive. Wide tape spreads the load on the panel; narrow tape is used along edges and returns.
Width, colour and put-up are set per order, so a mixed carton is normal rather than an exception. Minimum order is 500 m stock colour / 3,000 m dyed, and the master roll exists after the first run, which means a repeat order on the same construction does not add lead time.
To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.
Peel is tested on the finished lot, not on a sample kept from the previous run. If your incoming inspection uses a different pull speed or a different dwell time, tell us and we will match it so the two numbers are comparable.
We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.
Send the annual volume with the first enquiry, even if it is a range. Volume changes the put-up, the slitting plan and sometimes the yarn, and the same construction quoted at 500 m and at 50,000 m is not the same job.
The adhesive decides whether this product works, not the hook. Clean and dry the surface, apply with a roller at roughly 10 N/cm², and leave it 24 hours before loading — peel measured immediately after application reads about 60% of its final value. On polypropylene, polyethylene or heavy powder coat, test a sample first or specify the rubber version.
At 16 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Powder coat usually works with the heavy-tack acrylic, applied with firm roller pressure. Polypropylene and polyethylene have very low surface energy and are the most common field failure — test a sample on the actual substrate before production, or ask us to quote the rubber adhesive version.
Twenty-four hours at room temperature for full strength. Peel measured twenty minutes after application is typically 55–65% of the final value, so a QC pull test done straight off the line will always read low and is not a valid reject criterion.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape (25 m)
Self-Adhesive Hook and Loop Tape (25 m) in stock colours. Woven hook and loop,...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Self-Adhesive Hook and Loop Tape – Adjustable Self
Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and loop, sample...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Elastic Self-Adhesive Hook and Loop Tape – 12 mm, Black
Elastic Self-Adhesive Hook and Loop Tape at 12 mm in Black. Woven hook and loo...
MOQ 500 m stock colour / 3,000 m dyed
Self-Adhesive Hook and Loop
Elastic Self-Adhesive Hook and Loop Tape — variant 245
Elastic Self-Adhesive Hook and Loop Tape in stock colours. Woven hook and loop...
MOQ 500 m stock colour / 3,000 m dyed