Rolls and Back-to-Back

38 mm Hook and Loop Tape, Black

Hook and Loop Tape at 38 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.

Width38 mm
ColourBlack
ConstructionHook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed

Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.

Sample in 7 days Width tolerance ±0.5 mm Lot test report

Specification

Width38 mm
ColourBlack
ConstructionHook and Loop Tape
MOQ500 m stock colour / 3,000 m dyed
Minimum order500 m stock colour / 3,000 m dyed
Production lead time2-3 weeks after sample approval
PackingPoly bag + carton, palletised for LCL
CertificationREACH, RoHS; OEKO-TEX on request

What makes it different

  • Width and colour set per order
  • Lot report with every carton
  • Samples in 7 days

Other sizes in this construction

Same build, different width or length. Mixed sizes in one carton are fine.

SizeColourMOQ
50 mm Green 500 m stock colour / 3,000 m dyed
12 mm Green 500 m stock colour / 3,000 m dyed
20 mm Black 500 m stock colour / 3,000 m dyed
16 mm Green 500 m stock colour / 3,000 m dyed
50 mm 500 m stock colour / 3,000 m dyed
40 mm Red 500 m stock colour / 3,000 m dyed
125 mm 500 m stock colour / 3,000 m dyed
100 mm Green 500 m stock colour / 3,000 m dyed
25 mm 500 m stock colour / 3,000 m dyed
9 mm 500 m stock colour / 3,000 m dyed

Need a custom width or die profile?

Send a drawing and we will confirm tooling cost and tolerance before you commit.

Talk to an engineer

About this product

Reference priceUS$0.06 – 0.85 / mFOB Xiamen · varies with width and order quantity

Bulk hook and loop tape at 38 mm in Black. Every roll is splice-free in the standard 25 m put-up, and the lot report carries the width measured at both ends. At 38 mm there is enough engaged area that it behaves as a structural joint rather than a trim. Peel per unit width is unchanged, but the load spreads across the face instead of concentrating at two corners.

Where it is used

Common uses are back-to-back rolls for cable ties and wraps, adhesive rolls for panel assembly, and plain rolls that are cut to length at the machine. Splice-free put-up matters most where the roll feeds an automated head.

Ordering

Order quantity is quoted in metres or pieces depending on the construction, and we will convert between them if your system counts the other way. Mixed widths on one purchase order are handled as separate lines with a shared lead time.

How to specify it

Colour is the one specification that is cheapest to settle early and most expensive to settle late. Send a physical swatch if the colour is critical; a hex value on a screen will match under one light and fail under another.

Quality control

Colour is matched to a retained standard under D65, not to a screen. Metamerism is real: a black that matches under office light can read green under daylight, which is why the approved standard is a physical swatch rather than a photograph.

Packing and shipping

Pallets are built to a 1,100 mm footprint and strapped, with corner boards on export shipments. If your warehouse takes a different pallet, say so at the quote stage — re-palletising at the port is charged by the hour.

Tell us the standard your customer audits and we will quote the construction that meets it, with the report issued against the production lot. A generic certificate is easy to buy and hard to defend, and it is the first thing an auditor asks about.

Ordering and shipping

  • Sold by the roll, carton or pallet — mixed widths allowed.
  • EXW Xiamen, FOB or CIF to your port.
  • T/T 30% deposit, balance against copy of B/L.
  • Sample orders ship by courier in 7 days.

Choosing this construction

Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.

Common questions

What is 38 mm hook and loop used for?

At 38 mm this construction is normally specified for seating, upholstery, automotive trim and load-bearing seams. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.

Are the rolls spliced?

No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.

Can you slit to a width that is not on the list?

Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.

What is the minimum order and lead time?

Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.

More in Rolls and Back-to-Back

JINGWEI group Hook and Loop Tape Hook & Loops HOOKLOOP