Sew-On Hook and Loop Tape at 30 mm in Black. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 30 mm |
| Colour | Black |
| Material | Nylon |
| Construction | Sew-On Hook and Loop Tape |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 30 mm |
|---|---|
| Colour | Black |
| Material | Nylon |
| Construction | Sew-On Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 16 mm | 500 m stock colour / 3,000 m dyed | |
| Black | 500 m stock colour / 3,000 m dyed | |
| Grey | 500 m stock colour / 3,000 m dyed | |
| 25 mm | 500 m stock colour / 3,000 m dyed | |
| Black | 500 m stock colour / 3,000 m dyed | |
| 50 mm | 500 m stock colour / 3,000 m dyed | |
| 500 m stock colour / 3,000 m dyed | ||
| 500 m stock colour / 3,000 m dyed | ||
| 150 mm | Black | 500 m stock colour / 3,000 m dyed |
| 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerA woven sew-on hook and loop tape built for garment, bag and upholstery seams, where the tape has to survive washing and still release at the same force after fifty cycles. Supplied 30 mm wide in Black. At 30 mm there is enough engaged area that it behaves as a structural joint rather than a trim. Peel per unit width is unchanged, but the load spreads across the face instead of concentrating at two corners.
It is specified wherever the closure is washed: workwear, medical soft goods, sports braces, and reusable covers. Nylon holds colour fastness grade 4 after five washes at 40 degrees; polyester is the grade to choose when the garment is dry-cleaned commercially.
Quotations are built from three things: the construction, the width and the colour. Change any one of them and the price moves, which is why we ask for all three before quoting rather than sending a range and adjusting afterwards.
The put-up matters as much as the width. A 25 m roll on a 38 mm core will not fit a mandrel built for 76 mm cores, and a kiss-cut part packed flat behaves differently on a dispenser than the same part wound on a roll.
Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.
Liner-backed goods are packed flat rather than on a core where the part is kiss-cut, because a tight wind puts a set into the liner and the parts lift at the edges on the applicator.
If the width is not settled, send the drawing or the part it has to hold and we will suggest the narrowest width that does the job. Narrower is cheaper and follows a radius better; wider only helps where a large flat face has to stay down.
Width is set by the seam, not by the load: 16–20 mm for apparel and light closures, 25–38 mm for bags and upholstery, 50 mm and above where the joint has to stay flat under load. Stitch through the tape, not beside it — a seam that stops short of the edge lets the corner lift and start a peel.
At 30 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Nylon tape survives repeated washing at 40 °C; colour fastness holds grade 4 after five washes on the dyed line. Dry cleaning solvents attack the hook monofilament over time, so specify polyester if the garment is dry-cleaned commercially. Stitch through the tape so the seam, not the adhesive, carries the load.
Yes. Every roll is supplied as a matched hook and loop pair unless you ask for single-sided hook or loop only, which we also supply for converters who already stock the other half.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Sew-On Hook and Loop Tape
Sew-On Hook and Loop Tape, Patches Fastener
Sew-On Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
12 mm Reusable Sew-On Hook and Loop Tape, Black
Reusable Sew-On Hook and Loop Tape at 12 mm in Black. Woven hook and loop, sam...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
16 mm Reusable Sew-On Hook and Loop Tape, Black
Reusable Sew-On Hook and Loop Tape at 16 mm in Black. Woven hook and loop, sam...
MOQ 500 m stock colour / 3,000 m dyed
Sew-On Hook and Loop Tape
Nylon Sew-On Hook and Loop Tape, Black
Sew-On Hook and Loop Tape in Black. Woven hook and loop, samples in 7 days, MO...
MOQ 500 m stock colour / 3,000 m dyed