Hook and Loop Tape – 10 mm (Nylon)
Hook and Loop Tape at 10 mm in stock colours. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 10 mm |
| Material | Nylon |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
Specification
| Width | 10 mm |
|---|---|
| Material | Nylon |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 15-25 days after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
What makes it different
- Width and colour set per order
- Lot report with every carton
- Samples in 7 days
Other sizes in this construction
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 50 mm | Green | 500 m stock colour / 3,000 m dyed |
| 12 mm | Green | 500 m stock colour / 3,000 m dyed |
| 20 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Green | 500 m stock colour / 3,000 m dyed |
| 50 mm | 500 m stock colour / 3,000 m dyed | |
| 40 mm | Red | 500 m stock colour / 3,000 m dyed |
| 125 mm | 500 m stock colour / 3,000 m dyed | |
| 100 mm | Green | 500 m stock colour / 3,000 m dyed |
| 25 mm | 500 m stock colour / 3,000 m dyed | |
| 9 mm | 500 m stock colour / 3,000 m dyed |
Need a custom width or die profile?
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerAbout this product
Hook and loop tape in a stock colour at 10 mm, wound under controlled tension so the roll does not telescope when it is mounted on a slitter or a laminator. At 10 mm this is a narrow build. It follows a tight radius and sits flat on small parts, but the engaged area at the edge is small, so it is not the width to pick where the joint is opened under load every day.
Where it is used
It is used by bag and case makers, furniture producers, automotive tier suppliers and packaging converters. If you run a fixed guide, ask for the width measured at the core and at the outside of the roll on the lot report — that is where a slitting drift shows up first.
Ordering
Samples ship in seven days from a stock construction, cut to the width you ask for. Bulk runs fifteen to twenty-five days after sample approval, EXW Xiamen, FOB or CIF to your port.
How to specify it
To quote this without a round of questions we need four things: the width, the colour, the substrate or the seam it goes into, and the annual volume. The first three decide the construction; only the fourth decides the price band.
Quality control
Peel is tested on the finished lot, not on a sample kept from the previous run. If your incoming inspection uses a different pull speed or a different dwell time, tell us and we will match it so the two numbers are comparable.
Packing and shipping
Made-up straps and die-cut parts ship counted and bagged by size, with the count marked on the bag rather than only on the carton. That is the difference between a receiving check that takes ten minutes and one that takes a morning.
If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.
Ordering and shipping
- Sold by the roll, carton or pallet — mixed widths allowed.
- EXW Xiamen, FOB or CIF to your port.
- T/T 30% deposit, balance against copy of B/L.
- Sample orders ship by courier in 7 days.
Choosing this construction
Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.
Common questions
What is 10 mm hook and loop used for?
At 10 mm this construction is normally specified for cable bundling, apparel closures, small adjustable straps and light packaging. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
Are the rolls spliced?
No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.
Can you slit to a width that is not on the list?
Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.
What is the minimum order and lead time?
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 15–25 days after sample approval, with samples typically shipped in 7 days.
More in Rolls and Back-to-Back
Rolls and Back-to-Back
Back-to-Back Hook and Loop Tape – 16 mm, Black
Back-to-Back Hook and Loop Tape at 16 mm in Black. Woven hook and loop, sample...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Hook and Loop Strap – 38 mm
Hook and Loop Strap at 38 mm in stock colours. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Hook and Loop Tape – 150 mm x 25 m
Hook and Loop Tape at 150 mm in stock colours. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Elastic Hook and Loop Tape – 10 mm, Black
Elastic Hook and Loop Tape at 10 mm in Black. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed