Hook and Loop Tape at 25 mm in White. Woven hook and loop, samples in 7 days, MOQ 500 m.
| Width | 25 mm |
| Colour | White |
| Material | Nylon |
| Construction | Hook and Loop Tape |
| Minimum order | 500 m stock colour / 3,000 m dyed |
Not ready to ask for a price? Just ask a question — an engineer replies, not a sales script.
| Width | 25 mm |
|---|---|
| Colour | White |
| Material | Nylon |
| Construction | Hook and Loop Tape |
| MOQ | 500 m stock colour / 3,000 m dyed |
| Minimum order | 500 m stock colour / 3,000 m dyed |
| Production lead time | 2-3 weeks after sample approval |
| Packing | Poly bag + carton, palletised for LCL |
| Certification | REACH, RoHS; OEKO-TEX on request |
Same build, different width or length. Mixed sizes in one carton are fine.
| Size | Colour | MOQ |
|---|---|---|
| 50 mm | Green | 500 m stock colour / 3,000 m dyed |
| 12 mm | Green | 500 m stock colour / 3,000 m dyed |
| 20 mm | Black | 500 m stock colour / 3,000 m dyed |
| 16 mm | Green | 500 m stock colour / 3,000 m dyed |
| 50 mm | 500 m stock colour / 3,000 m dyed | |
| 40 mm | Red | 500 m stock colour / 3,000 m dyed |
| 125 mm | 500 m stock colour / 3,000 m dyed | |
| 100 mm | Green | 500 m stock colour / 3,000 m dyed |
| 25 mm | 500 m stock colour / 3,000 m dyed | |
| 9 mm | 500 m stock colour / 3,000 m dyed |
Send a drawing and we will confirm tooling cost and tolerance before you commit.
Talk to an engineerThis is the roll-goods version of hook and loop tape: 25 mm, White, held to plus or minus 0.5 mm at both the core and the outside of the roll. 25 mm is the width most often specified for closures and light bundling. It carries a normal seam allowance on both sides, so it can be stitched or stapled without the edge fraying into the stitch line.
Typical work is converting: slitting to a customer width, laminating to foam or film, die-cutting parts, and supplying a production line that applies tape from a roll rather than a made-up part. The web has to be consistent or the whole line drifts.
Quotations are built from three things: the construction, the width and the colour. Change any one of them and the price moves, which is why we ask for all three before quoting rather than sending a range and adjusting afterwards.
If the width is still open, send the part, the drawing or a photograph with a ruler in it. Choosing between 20 mm and 25 mm on a photograph alone is guesswork, and the difference matters at the edge where the peel starts.
Incoming yarn is checked for denier and colour before weaving, and the finished roll is measured at the core and at the outside. A slitting drift shows up at one end long before it shows up in the middle, which is why both ends are measured.
We ship the lot report inside the carton and by email, so the paperwork is with the goods and with your QA inbox at the same time. Certificates are issued per lot, not per year.
If this is a repeat of an existing part, send the drawing or the previous lot number and we will match the construction rather than re-specify it. Re-specifying a part that already works is how a working assembly picks up a new failure mode.
Bulk rolls are for converters who slit, coat or die-cut downstream. Check the splice count and the width tolerance at both ends of the roll before you build a line around it — a roll that measures 25 mm at the start and 24.4 mm at the end will jam a fixed guide.
At 25 mm this construction is normally specified for furniture trim, panel fixing, mid-weight strap assemblies and equipment covers. The width does not change the peel per unit width much, but narrower tape engages fewer hooks at the edge, which is where peeling starts — so if the joint opens repeatedly, go up one width rather than up one grade.
No. Standard 25 m rolls are splice-free, and the width is held within ±0.5 mm at both ends. If you are running a fixed guide or a slitter, ask for the width measured at the core and at the outside of the roll on the lot report.
Yes, from 10 mm up to 150 mm in 1 mm steps. Slitting runs on a tension-controlled line at the mill, so a custom width does not add lead time once the master roll exists.
Minimum order for this item is 500 m stock colour / 3,000 m dyed. Production runs 2–3 weeks after sample approval, with samples typically shipped in 7 days.
Rolls and Back-to-Back
10 mm Magnetic Hook and Loop Tape, Black
Magnetic Hook and Loop Tape at 10 mm in Black. Woven hook and loop, samples in...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Hook and Loop Tape, Wholesale Soft
Hook and Loop Tape in stock colours. Woven hook and loop, samples in 7 days, M...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
Double-Sided Hook and Loop Tape, Custom Width
Double-Sided Hook and Loop Tape in stock colours. Woven hook and loop, samples...
MOQ 500 m stock colour / 3,000 m dyed
Rolls and Back-to-Back
30 mm Nylon Hook and Loop Tape, Black
Hook and Loop Tape at 30 mm in Black. Woven hook and loop, samples in 7 days,...
MOQ 500 m stock colour / 3,000 m dyed